Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
140mm square case fan, translucent red blades, red LED ring, 25mm thick

BGears

BGears b-PWM 140 Red case fan 140mm 2000 RPM 110 CFM 2 Ball

SKU CH-W8YN-8W13S MPN b-PWM 140 Red

A 140 mm case fan with 15 blades, two-ball bearings and PWM control delivers up to 2000 RPM and 110 CFM at 35.8 dBA

  • Fan Counts1 Fan
  • Fan ControllerNo Controller
  • TypeCase Fan
  • CompatibilityCase
  • Fan Size140mm
  • Fan Thickness25mm

LED Red

  • PWM speed control from 500 to 1800 RPM for quiet or maximum airflow
  • 110 CFM at 2000 RPM moves heat quickly through your chassis
  • 15 aerodynamic blades on a 140 mm frame optimise static pressure
  • Dual ball bearing construction extends operating life under continuous use
  • Translucent red blades with four red LEDs add a distinctive lighting accent

140 mm PWM case fan with red LEDs

The BGears b-PWM 140 Red is a 140 mm case fan designed for chassis cooling. It features a two-ball-bearing motor and 15 aerodynamic blades. Red translucent blades and four red LEDs provide internal lighting. A 4-pin PWM connector and a 3-to-4-pin Molex adapter are included for motherboard or power-supply connection.

Sustained-load behaviour

PWM control adjusts speed between 500 and 1800 RPM based on thermal demand. At the 1800 RPM operating point the fan moves 110 CFM of air while producing 35.8 dBA of noise. The two-ball-bearing design maintains consistent rotational stability during extended high-speed operation. The 25 mm frame depth fits standard 140 mm mounting points.

Upgrade context

This unit replaces a single 140 mm fan that lacks PWM speed regulation or LED illumination. The jump is worthwhile when the existing cooler runs at fixed voltage, generates excessive noise at full speed, or cannot match the 110 CFM airflow ceiling. Builders needing multiple fans or a different colour scheme should look elsewhere.

I korthet

  • PWM speed control from 500 to 1800 RPM for quiet or maximum airflow
  • 110 CFM at 2000 RPM moves heat quickly through your chassis
  • 15 aerodynamic blades on a 140 mm frame optimise static pressure
  • Dual ball bearing construction extends operating life under continuous use
  • Translucent red blades with four red LEDs add a distinctive lighting accent

Specifikationer

BrandBgears
Modelb-PWM 140 Red
Fan Counts1 Fan
Fan ControllerNo Controller
TypeCase Fan
CompatibilityCase
Fan Size140mm
Fan Thickness25mm
Bearing Type2 Ball
RPM2000 RPM
Air Flow110 CFM
Power Connector4 Pin
ColorRed
LEDRed
Fraktvikt0.21 kg
Paketstorlek216 × 157 × 33 mm

Andra versioner av den här modellen

2 till i samma serie

Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.

Frågor om den här produkten

How loud is the b-PWM 140 Red at its maximum 1800 RPM speed?

The fan produces 35.8 dBA at 1800 RPM, which is a quiet level suitable for continuous operation in a typical build.

Does the b-PWM 140 Red need a separate fan controller to run?

No, it connects directly to a motherboard 4-pin PWM header or a PSU Molex connector using the included adapter; no extra controller is required.

Will the 25 mm thick 140 mm frame fit the same mounting points as my older 140 mm fans?

Yes, the 140 mm square frame with standard screw holes matches the common 140 mm mounting pattern used on older cases and radiators.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.