Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Rectangular 2.5 inch SSD with black metal casing and label

BIWIN STORAGE TECHNOLOGY LIMITED

BIWIN STORAGE TECHNOLOGY LIMITED 16GB MLC 2.5" SATA internal SSD

SKU CH-F0YA-EZGK4

A 16 GB MLC 2.5" SATA internal SSD delivering up to 511 MB/s read and 172 MB/s write with a 2,000,000-hour MTBF

  • Device TypeInternal Solid State Drive (SSD)
  • Form Factor2.5"
  • Capacity16GB
  • Memory ComponentsMLC
  • InterfaceSATA III
  • Max Sequential Read270 MB/s

Options 16GB

  • Fast boot-ups with 270 MB/s sequential read speed
  • Quick file saves at 89 MB/s sequential write speed
  • Runs cool on 0.30 W idle power draw
  • Fits slim laptops with 7 mm low-profile design
  • Built to last with 2,000,000-hour MTBF rating

Capacity and Audience

This 16 GB internal SSD uses MLC flash and a 2.5 inch form factor. It suits embedded systems, thin clients or legacy hardware that need a small boot drive. Low power draw and a wide temperature range support continuous operation in compact enclosures.

SATA III Interface Limits

The drive connects over SATA III at 6 Gb/s and remains compatible with 3 Gb/s ports. Sequential throughput is capped by the interface at 270 MB/s read and 89 MB/s write under typical workloads. Actual speed depends on the host controller and cable quality.

MLC Endurance Decides Fit

MLC memory provides higher write endurance than TLC alternatives, which matters for workloads with frequent small writes. The 2 000 000 hour MTBF rating reflects this durability. Choose this drive when longevity outweighs raw capacity needs.

I korthet

  • Fast boot-ups with 270 MB/s sequential read speed
  • Quick file saves at 89 MB/s sequential write speed
  • Runs cool on 0.30 W idle power draw
  • Fits slim laptops with 7 mm low-profile design
  • Built to last with 2,000,000-hour MTBF rating

Specifikationer

BrandBIWIN
Device TypeInternal Solid State Drive (SSD)
Form Factor2.5"
Capacity16GB
Memory ComponentsMLC
InterfaceSATA III
Max Sequential Read270 MB/s
Max Sequential Write89 MB/s
MTBF2,000,000 hours
Power Consumption (Idle)0.30W
Power Consumption (Active)3.42W
Operating Temperature0 to 70 °C
Storage Temperature-40 to 85 °C
Operating Humidity5 to 95%
Height98.7mm
Width69.55mm
Depth7mm
Weight80g

Andra versioner av den här modellen

3 till i samma serie

Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.

Frågor om den här produkten

Which capacity should I choose for this BIWIN 2.5-inch SATA SSD?

The only capacity offered is 16 GB with MLC flash, so that is the single option to select.

What do the 270 MB/s read and 89 MB/s write figures mean once the drive is installed?

They are the maximum sequential speeds the drive can sustain over the SATA III link for large, continuous transfers.

What does the SATA III interface cap at in real use?

The SATA III connection runs at 6 Gb/s, and the drive reaches up to 270 MB/s read and 89 MB/s write in sequential workloads.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.