Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Green 288-pin DDR4 server memory module with black chips and silver label

Brute Networks

Brute Networks 8GB DDR4-2933 1Rx8 1.20V Registered ECC server RAM

SKU CH-N56M-98FGG

8GB registered ECC DDR4-2933 module with 1Rx8 organisation for HPE-compatible servers

  • Capacity8GB
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2933 (PC4 23400)
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 8 GB capacity expands server memory headroom
  • DDR4-2933 speed delivers 23400 MT/s data rate
  • Registered ECC design protects data integrity
  • 20 V operation reduces power draw
  • 288-pin DIMM fits standard DDR4 server slots

HPE-Compatible 8GB DDR4-2933 Registered ECC

This 8GB DDR4-2933 Registered ECC module is built for servers that require HPE part number P19040-H21 compatibility. It operates at 1.20V with a 1Rx8 rank configuration on a 288-pin DDR4 SDRAM form factor. The module uses major-brand chips from Samsung, SK Hynix, or Micron and is validated for 100% compatibility with the target platform. It is intended for administrators maintaining existing DDR4 infrastructure.

Sustained load stability through registered

The registered design places a buffer between the memory controller and the DRAM chips, reducing electrical load on the bus during continuous operation. ECC circuitry detects and corrects single-bit errors in real time, preventing data corruption during long-running workloads. Major-brand components are 100% tested and validated to maintain signal integrity at the rated 2933 MT/s speed. Orders are filled with identically matched modules to avoid timing mismatches.

DDR4 platform limits define upgrade ceiling

The DDR4 interface caps bandwidth at the PC4-23400 specification, so this module cannot exceed the 2933 MT/s data rate. Capacity is fixed at 8GB per DIMM, limiting total memory to the number of slots the server provides. Registered ECC modules are not interchangeable with unbuffered or non-ECC variants, so mixed populations are not supported. Buyers needing higher densities or faster speeds must migrate to a newer memory generation.

I korthet

  • 8 GB capacity expands server memory headroom
  • DDR4-2933 speed delivers 23400 MT/s data rate
  • Registered ECC design protects data integrity
  • 20 V operation reduces power draw
  • 288-pin DIMM fits standard DDR4 server slots

Specifikationer

BrandHPE
Capacity8GB
Type288-Pin DDR4 SDRAM
SpeedDDR4 2933 (PC4 23400)
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor Brand Chipset

Frågor om den här produkten

How much heat and power does this 1.20 V registered ECC DDR4-2933 module add when the server runs all day?

The module operates at 1.20 V and DDR4-2933 speed with a single-rank 1Rx8 layout, which keeps power draw and thermal output low for continuous server workloads.

What server platform must already support 288-pin registered DDR4 ECC memory for this stick to function?

The module requires a server motherboard with 288-pin DDR4 slots that accept registered ECC memory at 1.20 V.

Will this 1Rx8 registered ECC DDR4-2933 stick work alongside older DDR4 modules in the same server?

Mixing ranks, speeds or voltages can prevent the system from posting; the server will run all installed modules at the lowest common speed and voltage, so identical modules are recommended.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.