Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Green circuit board SODIMM module with gold 100-pin edge connector and black memory chips

Computer Memory Solutions

Computer Memory Solutions 512MB DDR 333 (PC 2700) SODIMM 100-Pin memory upgrade

SKU CH-96B4-WPBGV

512 MB DDR 333 SODIMM module for Kyocera FS-1100, FS-1300D, FS-C5015N, FS-C5020N, FS-C5025N and FS-C5030N printers

  • Capacity512MB
  • SpeedDDR 333 (PC 2700)
  • CAS LatencyCL2.5
  • Timing3-3-3
  • Voltage2.5V
  • ECCNo
  • 512MB capacity expands printer memory for larger jobs
  • DDR 333 (PC 2700) speed matches Kyocera FS-1100, FS-1300D specifications
  • CL2.5 latency with 3-3-3 timing optimises data access
  • 5V unbuffered SODIMM installs directly into 100-pin slots
  • Guaranteed compatibility with Kyocera FS-C5015N, FS-C5020N, FS-C5025N, FS-C5030N

Target Printers

This 512MB DDR 333 SODIMM module is built for Kyocera FS-1100, FS-1300D, FS-C5015N, FS-C5020N, FS-C5025N and FS-C5030N printers. It addresses memory limits in those devices and suits offices needing reliable print-job handling.

Slot Constraints

Each printer accepts two 100-pin SODIMM slots with a maximum of 512MB per socket and a total ceiling of 1GB. The stick is unbuffered, non-ECC and runs at 2.5V, matching the factory electrical specification without adapters.

Sustained Operation

CL2.5 timing at 333 MHz delivers steady throughput for queued documents. Major-brand chips and the absence of a heat spreader keep the profile slim for tight printer bays while the lifetime warranty backs continuous duty cycles.

I korthet

  • 512MB capacity expands printer memory for larger jobs
  • DDR 333 (PC 2700) speed matches Kyocera FS-1100, FS-1300D specifications
  • CL2.5 latency with 3-3-3 timing optimises data access
  • 5V unbuffered SODIMM installs directly into 100-pin slots
  • Guaranteed compatibility with Kyocera FS-C5015N, FS-C5020N, FS-C5025N, FS-C5030N

Specifikationer

BrandComputer Memory Solutions
ModelCM512MBPC2700100PIN
Capacity512MB
SpeedDDR 333 (PC 2700)
CAS LatencyCL2.5
Timing3-3-3
Voltage2.5V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemKyocera Fs-1100, Fs-1300D, Fs-C5030N, Fs-C5015N
Package Content1 Memory RAM Stick

Frågor om den här produkten

How much memory can the Kyocera FS-1100 accept per slot?

Each socket supports a maximum of 512MB, so this module fills one slot to its limit.

Does the 2.5V DDR 333 SODIMM run warm enough to need extra cooling?

It operates at standard 2.5V without a heat spreader, so normal chassis airflow is sufficient for all-day printing workloads.

Which Kyocera printers are confirmed to work with this 100-pin SODIMM?

Compatible models include the FS-1100, FS-1300D, FS-C5015N, FS-C5020N, FS-C5025N and FS-C5030N.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.