Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Two green circuit boards with gold contacts and black chips

Computer Memory Solutions

Computer Memory Solutions 8GB (2x4GB) DDR3 1066MHz CL7 MacBook Pro 13 Mid 2010

SKU CH-TKRR-F99CF

8GB DDR3 1066MHz CL7 2×4GB SO-DIMM kit for 13-inch MacBook Pro Mid 2010

  • Capacity8GB (2 x 4GB)
  • Type204-Pin DDR3 SO-DIMM
  • SpeedDDR3 1066 (PC3 8500)
  • CAS LatencyCL7
  • Timing7-7-7
  • Voltage1.5V
  • 8GB dual-channel kit doubles memory bandwidth for snappier multitasking
  • CL7 low latency accelerates data access in demanding applications
  • 5 V standard voltage ensures stable operation without extra cooling
  • 204-pin SO-DIMM form factor fits the Mid 2010 MacBook Pro slots exactly
  • Guaranteed compatibility with Apple part numbers MC374 and MC375 series

Made for Mid 2010 MacBook Pro 13

This 8 GB kit contains two 4 GB DDR3 SO-DIMM modules built to the exact specification Apple used in the 13-inch MacBook Pro released in mid 2010. It is intended for owners of that model who want to reach the machine's maximum supported memory without guessing compatibility.

Unbuffered 204-pin sticks with major-brand chips

The modules are unbuffered, non-ECC and carry no heat spreader, so they slide straight into the two factory SO-DIMM slots. Major-brand DRAM chips and a CL7 7-7-7 timing at 1.5 V match the original electrical profile, meaning the Mac recognises them at boot with no firmware changes.

1066 MHz DDR3 is the decisive spec

The MacBook Pro 13 mid 2010 memory controller is locked to DDR3-8500 at 1066 MHz; faster or slower modules will either down-clock or fail to post. This kit matches that single speed exactly, so it is the correct part only for that generation of MacBook Pro.

I korthet

  • 8GB dual-channel kit doubles memory bandwidth for snappier multitasking
  • CL7 low latency accelerates data access in demanding applications
  • 5 V standard voltage ensures stable operation without extra cooling
  • 204-pin SO-DIMM form factor fits the Mid 2010 MacBook Pro slots exactly
  • Guaranteed compatibility with Apple part numbers MC374 and MC375 series

Specifikationer

BrandComputer Memory Solutions
ModelCM512648500SODRH
Capacity8GB (2 x 4GB)
Type204-Pin DDR3 SO-DIMM
SpeedDDR3 1066 (PC3 8500)
CAS LatencyCL7
Timing7-7-7
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemApple Macbook Pro 13-Inch (Mid 2010)
Package Content2 Memory RAM Sticks

Frågor om den här produkten

Does the PC3-8500 DDR3 1066MHz rating cap the real-world bandwidth on the Mid 2010 MacBook Pro 13?

The kit runs at DDR3 1066 (PC3-8500), which is the maximum speed the Mid 2010 MacBook Pro 13 memory controller supports, so the modules will operate at their rated 1066MHz without downclocking.

Will these 204-pin SO-DIMMs physically fit the two memory slots in a MacBook Pro 13 from Mid 2010?

Yes, each module is a standard 204-pin DDR3 SO-DIMM without a heat spreader, matching the exact form factor required by the two SO-DIMM slots in the Mid 2010 13-inch MacBook Pro.

What is the correct installation sequence for the two 4GB sticks, and which step do people most often get wrong?

Power off completely, remove the bottom case, release the side clips on both slots, insert each stick at the same angle until the gold contacts disappear, then press down firmly until both clips click — the step most often missed is pressing hard enough to fully seat both modules so the clips engage.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.