Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in

Computer Memory Solutions

Computer Memory Solutions 8GB (2x4GB) DDR3 1600MHz CL11 for HP rp5800 A74

SKU CH-RKZV-XNB1M

Dual-channel 8 GB DDR3 kit at 1600 MHz CL11, validated for the HP rp5800 A74 POS system

  • Capacity8GB (2 x 4GB)
  • Type240-Pin DDR3 SDRAM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Timing11-11-11
  • Voltage1.5V
  • 8 GB dual-channel kit upgrades HP rp5800 POS systems
  • DDR3 1600 MHz CL11 timing matches factory specifications
  • 5 V unbuffered non-ECC modules install without configuration
  • Two 4 GB 240-pin DIMMs fill two of four slots
  • Major-brand chipset backed by limited lifetime warranty

System-Specific DDR3 Kit for HP rp5800

This 8 GB kit contains two 4 GB unbuffered DIMMs built to match the HP rp5800 point-of-sale platform. Each module runs at 1600 MHz with CL11 timing at 1.5 V. The non-ECC design suits the commercial desktop workloads the system was designed for.

240-Pin DIMM Form Factor and Major-Brand Chips

The 240-pin DDR3 layout drops straight into the four available slots on the rp5800 motherboard. Major-brand chipsets underpin the modules, and the lack of a heat spreader keeps the profile low for tight chassis clearance. Unbuffered, single-rank organisation simplifies installation without BIOS tuning.

Upgrade Path to 32 GB Maximum

The board supports up to 32 GB across its four sockets, so this pair leaves two slots free for future expansion. Builders who need ECC error correction or registered modules must look elsewhere, as this kit is strictly non-ECC unbuffered. The jump is worthwhile when the existing configuration is below 8 GB and the workload fits standard desktop memory.

I korthet

  • 8 GB dual-channel kit upgrades HP rp5800 POS systems
  • DDR3 1600 MHz CL11 timing matches factory specifications
  • 5 V unbuffered non-ECC modules install without configuration
  • Two 4 GB 240-pin DIMMs fill two of four slots
  • Major-brand chipset backed by limited lifetime warranty

Specifikationer

BrandComputer Memory Solutions
ModelCM5126412800DIMM
Capacity8GB (2 x 4GB)
Type240-Pin DDR3 SDRAM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Timing11-11-11
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemHP/Compaq Point of Sale (POS) System rp5800
Package Content2 Memory RAM Sticks

Frågor om den här produkten

What does the PC3 12800 DDR3 1600 rating mean for real-world bandwidth on the HP rp5800?

PC3 12800 is the JEDEC standard name for DDR3 1600 memory; the HP rp5800 runs these modules at 1600 MHz with CL11 timing.

Will these 240-pin DIMMs fit the four slots inside the HP rp5800 chassis?

Yes, the kit contains two 240-pin unbuffered non-ECC DIMMs; the HP rp5800 has four DDR3 DIMM sockets supporting up to 32 GB total.

What is the correct order to install the two 4 GB sticks so the HP rp5800 recognises the full 8 GB?

Populate the lowest-numbered sockets first, typically the two black slots, then power on; the system will detect both modules automatically.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.