Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in

Computer Memory Solutions

Computer Memory Solutions CM5127212800ECCR1R4L 8GB (2x4GB) DDR3 1600 ECC Registered DIMM memory upgrade

SKU CH-HPCB-4SR7N

ECC registered DDR3 kit adds 8 GB across two 4 GB DIMMs at 1600 MHz for the Precision Workstation T3610

  • Capacity8GB (2 x 4GB)
  • Type240-Pin DDR3 SDRAM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Timing11-11-11
  • Voltage1.5V
  • ECC protection prevents data corruption in critical workloads
  • Registered design stabilises signal integrity for server reliability
  • 1600 MHz DDR3 speed matches Precision Workstation T3610 specifications
  • 5 V operation meets standard DDR3 voltage requirements
  • Dual 4 GB kit enables dual-channel performance

Targeted upgrade for Dell Precision T3610

This 8 GB kit contains two 4 GB registered ECC DIMMs built for the Precision Workstation T3610. It is intended for owners of that workstation who need to expand memory with modules validated for the platform.

Registered ECC limits on a single platform

The modules operate at DDR3 1600 with CL11 timing and 1.5 V, using a 240-pin interface that only fits DDR3 slots. Registered signalling and ECC require a compatible chipset and BIOS; the kit is not compatible with standard desktop boards that expect unbuffered non-ECC memory.

1Rx4 organisation decides fit

Each DIMM uses a single-rank x4 configuration (1Rx4). The workstation’s eight DIMM sockets accept this organisation, but systems that require dual-rank or x8 modules will not support these sticks.

I korthet

  • ECC protection prevents data corruption in critical workloads
  • Registered design stabilises signal integrity for server reliability
  • 1600 MHz DDR3 speed matches Precision Workstation T3610 specifications
  • 5 V operation meets standard DDR3 voltage requirements
  • Dual 4 GB kit enables dual-channel performance

Specifikationer

BrandComputer Memory Solutions
ModelCM5127212800ECCR1R4L
Capacity8GB (2 x 4GB)
Type240-Pin DDR3 SDRAM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Timing11-11-11
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemPrecision Workstation T3610
Package Content2 Memory RAM Sticks

Frågor om den här produkten

Should I choose the 2x4GB kit or a single 8GB module for my Precision Workstation T3610?

The 2x4GB kit fills two of the eight registered DIMM slots and runs in dual-channel mode, which the T3610 chipset supports for higher memory bandwidth than a single module.

What does the DDR3 1600 (PC3 12800) rating deliver in the actual workstation?

In the Precision Workstation T3610 the modules operate at 1600 MHz with CL11 timing, providing the rated 12800 MB/s peak transfer rate when the memory controller runs at its native DDR3 1600 speed.

How does the registered ECC DDR3 interface affect maximum capacity in the T3610?

The registered ECC design allows the T3610 to populate all eight DIMM sockets, reaching the 128 GB RDIMM limit, whereas unbuffered non-ECC memory is capped at 64 GB on the same platform.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.