Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Four green DDR2 DIMMs with gold contacts and black chips

Computer Memory Solutions

Computer Memory Solutions CM512723200ECCREG2R4 16GB (4x4GB) DDR2 400MHz ECC Registered DIMM memory upgrade

SKU CH-EFSV-VKG15

Four 4 GB DDR2 registered ECC DIMMs totalling 16 GB at 400 MHz for HP xw8200 workstations

  • Capacity16GB (4 x 4GB)
  • Type240-Pin DDR2 SDRAM
  • SpeedDDR2 400 (PC2 3200)
  • CAS LatencyCL3
  • Timing3-3-3
  • Voltage1.8V
  • 16 GB kit (4 × 4 GB) expands xw8200 to its true 16 GB limit
  • Registered ECC DDR2 400 MHz protects server data integrity
  • CL3 3-3-3 timing at 1.8 V keeps latency low
  • 240-pin 2Rx4 modules install in pairs after first DIMM
  • CMS lifetime warranty backs compatibility with listed HP workstations

Capacity and fit

This 16 GB kit contains four 4 GB registered ECC DIMMs built for the HP xw8200 workstation series. Each module runs at DDR2 400 (PC2-3200) with CL3 timing at 1.8 V. The dual-rank 2Rx4 design matches the chipset limit of eight ranks. BIOS must be current for the full 16 GB to be recognised.

Sustained behaviour

Registered buffering and ECC keep data integrity stable during long server workloads. The modules operate within standard DDR2 voltage and timing, so thermal load remains predictable across extended sessions. Rank population rules require the first DIMM singly, then pairs, which maintains consistent electrical loading.

Upgrade context

The kit replaces smaller or non-ECC configurations that cannot reach the 16 GB ceiling or lack error correction. It is not suited for systems that accept only single-rank modules or non-registered memory. Builders needing higher density per slot or a newer DDR generation must choose a different platform.

I korthet

  • 16 GB kit (4 × 4 GB) expands xw8200 to its true 16 GB limit
  • Registered ECC DDR2 400 MHz protects server data integrity
  • CL3 3-3-3 timing at 1.8 V keeps latency low
  • 240-pin 2Rx4 modules install in pairs after first DIMM
  • CMS lifetime warranty backs compatibility with listed HP workstations

Specifikationer

BrandComputer Memory Solutions
ModelCM512723200ECCREG2R4
Capacity16GB (4 x 4GB)
Type240-Pin DDR2 SDRAM
SpeedDDR2 400 (PC2 3200)
CAS LatencyCL3
Timing3-3-3
Voltage1.8V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
Heat SpreaderBased on Current Inventory (If Required Please Contact)
Compatible SystemHp Workstation Xw8200 Series
Package Content1 Memory RAM Stick

Frågor om den här produkten

How much power does this DDR2 400 memory kit draw at its rated 1.8V when the workstation runs continuously?

Each module operates at the standard DDR2 voltage of 1.8V; total power draw depends on the system's memory controller and workload.

What must the HP xw8200 workstation already have installed so these four 240-pin Registered ECC DIMMs can function?

The board must support Registered ECC DDR2 memory, provide six 240-pin slots, and run a BIOS version that recognises 16 GB across four dual-rank modules.

Can I keep the original 4 GB of slower DDR2 memory in the other two slots alongside this 16 GB kit?

The chipset allows a maximum of eight ranks; this kit uses eight ranks itself, so no additional DIMMs can be added without exceeding the rank limit.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.