BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 US$
0.00277056BTC
I lager
Corsair
Corsair CMK16GX4M2D3000C16 Vengeance LPX 16GB (2x8GB) DDR4 3000 CL16 desktop RAM
16 GB dual-channel DDR4 kit at 3000 MT/s with CL16 timings and anodized aluminum heat spreaders
- Capacity16GB (2 x 8GB)
- Type288-Pin PC RAM
- SpeedDDR4 3000 (PC4 24000)
- CAS LatencyCL16
- Timing16-20-20-38
- Voltage1.35V
- 16 GB dual-channel kit gives ample capacity for multitasking
- DDR4 3000 speed with CL16 latency delivers responsive performance
- 35 V operation reduces power draw and heat output
- Anodized aluminum heatspreader dissipates heat for stable overclocking
- Low-profile 288-pin design fits tight CPU cooler clearances
Vengeance LPX 16GB DDR4 Kit
This Corsair Vengeance LPX kit delivers 16GB of desktop memory as two 8GB modules. It runs at DDR4 3000 speed with a tested latency of CL16 and timings of 16-20-20-38. The modules operate at 1.35V and use the standard 288-pin DDR4 form factor. Anodized aluminum heat spreaders and a custom performance PCB are designed to manage thermals during high-performance overclocking.
For overclockers on Intel DDR4 platforms
Builders seeking reliable overclocking headroom on Intel DDR4 motherboards will find this kit compatibility-tested for that purpose. Individually screened ICs aim to provide consistent performance potential. It is not for systems limited to DDR3 memory, buyers requiring ECC error correction, or configurations needing more than two populated slots for quad-channel architectures.
DDR4 3000 CL16 at 1.35V
The decisive specification is the DDR4 3000 (PC4 24000) speed rating combined with CL16 latency at 1.35V. This voltage and frequency pairing determines whether your motherboard and CPU memory controller can run the kit at its rated XMP profile without manual tuning. Verify that your platform supports this specific DDR4 speed and voltage before purchase.
I korthet
- 16 GB dual-channel kit gives ample capacity for multitasking
- DDR4 3000 speed with CL16 latency delivers responsive performance
- 35 V operation reduces power draw and heat output
- Anodized aluminum heatspreader dissipates heat for stable overclocking
- Low-profile 288-pin design fits tight CPU cooler clearances
Specifikationer
| Brand | CORSAIR |
|---|---|
| Series | Vengeance LPX |
| Model | CMK16GX4M2D3000C16 |
| Capacity | 16GB (2 x 8GB) |
| Type | 288-Pin PC RAM |
| Speed | DDR4 3000 (PC4 24000) |
| CAS Latency | CL16 |
| Timing | 16-20-20-38 |
| Voltage | 1.35V |
| Color | Black |
| Heat Spreader | Anodized Aluminum |
| Features | Designed for high-performance overclocking Each VENGEANCE LPX module is built with a pure aluminum heatspreader for faster heat dissipation and cooler operation; and the custom performance PCB helps manage heat and provides superior overclocking headroom. Each IC is individually screened for performance potential. Designed for great looks Available in multiple colors to match your motherboard, your components, or just your style. Performance and Compatibility VENGEANCE LPX is optimized and compatibility tested for the latest Intel DDR4 motherboards and offers higher frequencies, grea |
| Fraktvikt | 0.10 kg |
| Paketstorlek | 157 × 89 × 8 mm |
Frågor om den här produkten
Will this kit fit in a standard ATX motherboard with a large CPU cooler?
The low-profile aluminum heatspreader is designed to clear most oversized air coolers while still fitting the 288-pin DDR4 slots on any ATX board.
What BIOS setting is needed to reach the rated 3000 MT/s speed?
Enable the XMP profile in your motherboard BIOS; the modules are programmed with a 1.35 V, CL16-20-20-38 profile that sets 3000 MT/s automatically.
Can I mix these modules with an existing 8 GB DDR4 stick?
Mixing different kits is not recommended; for stable dual-channel operation use the matched 2 × 8 GB pair from this kit.
Även i den här avdelningen
Andra har jämfört dessa
Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.
