BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 US$
0.00276657BTC
I lager
Corsair
Corsair CMW64GX4M4K3600C18 Vengeance RGB Pro 64GB (4x16GB) DDR4 3600 CL18 desktop RAM
A 64GB quad-channel DDR4 kit running at 3600 MT/s with CL18 timings, 1.35V operation and ten RGB LEDs per module controllable through iCUE software
- Capacity64GB (4 x 16GB)
- SpeedDDR4 3600 (PC4 28800)
- CAS LatencyCL18
- Timing18-19-19-39
- Voltage1.35V
- ColorBlack
- 64GB total capacity across four 16GB modules
- 3600MHz DDR4 speed with CL18 latency for responsive performance
- 10 ultra-bright RGB LEDs per module with iCUE synchronization
- Anodized aluminum heat spreader maintains stable operation at 1.35V
- XMP 2.0 support enables one-click BIOS configuration
64GB Vengeance RGB Pro Kit
This Corsair Vengeance RGB Pro kit delivers 64GB of DDR4 memory across four 16GB modules rated at 3600 MT/s with CL18 timings. Each stick carries ten addressable RGB LEDs controlled through iCUE software for synchronized lighting effects. The anodized aluminum heat spreader helps maintain stable operation at the rated 1.35V.
Ideal for High-Capacity RGB Builds
The 64GB capacity suits content creators, heavy multitaskers and enthusiasts who want a fully populated four-slot layout with matching RGB illumination. Systems limited to two memory slots or motherboards that cannot run four modules at 3600 MT/s should consider a different kit density or speed.
Verify Platform and Clearance Before Buying
Confirm your motherboard supports four-module populations at 3600 MT/s with XMP 2.0 and that the CPU memory controller can handle the load. Check that the heat spreader height clears your chosen CPU cooler, and ensure the power supply can provide the required 1.35V to all four modules simultaneously.
I korthet
- 64GB total capacity across four 16GB modules
- 3600MHz DDR4 speed with CL18 latency for responsive performance
- 10 ultra-bright RGB LEDs per module with iCUE synchronization
- Anodized aluminum heat spreader maintains stable operation at 1.35V
- XMP 2.0 support enables one-click BIOS configuration
Specifikationer
| Brand | CORSAIR |
|---|---|
| Series | Vengeance RGB Pro |
| Model | CMW64GX4M4K3600C18 |
| Capacity | 64GB (4 x 16GB) |
| Speed | DDR4 3600 (PC4 28800) |
| CAS Latency | CL18 |
| Timing | 18-19-19-39 |
| Voltage | 1.35V |
| Color | Black |
| Heat Spreader | Anodized Aluminum |
| Features | Dynamic Multi-Zone RGB Lighting 10 Ultra-bright RGB LEDs per module. Next Generation Software Take control in CORSAIR iCUE software and synchronize lighting with other CORSAIR RGB products, including CPU coolers, keyboards and fans. Custom Performance PCB Provides the highest signal quality for the greatest level of performance and stability. Tightly Screened Memory Carefully screened ICs for extended overclocking potential. Maximum Bandwidth and Tight Response Times Optimized for peak performance on the latest Intel and AMD DDR4 motherboards. No Wires Required Requires no extra wire |
| LED Color | RGB |
| Fraktvikt | 0.31 kg |
| Paketstorlek | 191 × 130 × 25 mm |
Frågor om den här produkten
What motherboard features are required for this 64 GB kit to run at its rated 3600 MT/s and CL18 timing?
A DDR4 motherboard with an XMP 2.0 capable BIOS is needed; enabling the XMP profile in BIOS applies the 3600 MT/s speed, 18-19-19-39 timings and 1.35 V automatically.
Can I keep my existing DDR4 modules and add this kit alongside them?
Mixing modules with different speeds, timings or voltages is not recommended; for stable operation replace the old set with this matched 4 x 16 GB kit.
How do I confirm the RGB lighting and performance are working after installation?
In CORSAIR iCUE the four modules appear with 10 addressable LEDs each for lighting control, and the memory tab shows 3600 MT/s, CL18 and the 18-19-19-39 timings when XMP is enabled.
Även i den här avdelningen
Andra har jämfört dessa
Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.
