DELL
DELL 400-AJQD 1.2TB 10000RPM SAS 2.5" internal hard drive
A 1.2 TB internal SAS hard drive spinning at 10000 RPM in a 2.5 inch form factor, hot-swappable for Dell PowerEdge servers
- InterfaceSAS
- Capacity1.2TB
- RPM10000 RPM
- Form Factor2.5"
- 2 TB capacity expands server storage
- 10000 RPM spindle speed accelerates data access
- SAS 12Gb/s interface enables fast transfers
- 5 inch form factor fits dense bays
- Hot-swappable design allows drive replacement without downtime
Dell 400-AJQD 1.2TB SAS Drive
The Dell 400-AJQD is a 1.2TB internal hard drive spinning at 10000 RPM. It uses a SAS interface for server and storage workloads. The 2.5-inch form factor fits compatible drive bays in Dell PowerEdge servers. This drive suits administrators adding capacity to supported systems.
Hot-Swap 2.5-Inch SAS Build
The drive uses a 2.5-inch chassis rated for hot-swap insertion in supported enclosures. SAS connectivity provides a 12Gb/s interface standard for data transfer. The physical design allows removal without powering down the host server. Retail or OEM packing may vary depending on supply source.
Verify Server Bay And Controller
Confirm the target server accepts 2.5-inch SAS drives and offers a compatible backplane or controller. Supported models include PowerEdge FC630 and PowerEdge M630 among other Dell PowerEdge Servers. Check the system documentation for drive carrier requirements before ordering. The drive is manufactured in China.
I korthet
- 2 TB capacity expands server storage
- 10000 RPM spindle speed accelerates data access
- SAS 12Gb/s interface enables fast transfers
- 5 inch form factor fits dense bays
- Hot-swappable design allows drive replacement without downtime
Specifikationer
| Interface | SAS |
|---|---|
| Capacity | 1.2TB |
| RPM | 10000 RPM |
| Form Factor | 2.5" |
Frågor om den här produkten
What does the 12 Gb/s SAS interface limit in real use?
The 12 Gb/s SAS link caps the peak transfer rate at 12 Gb/s, so sustained throughput cannot exceed that ceiling.
What physical space and mounting does the 2.5-inch drive require?
It fits a standard 2.5-inch drive bay and uses the hot-swap carrier rails found in compatible Dell PowerEdge servers.
How is the drive installed and which step is often missed?
Slide the drive into the hot-swap bay until the carrier clicks, then verify the server BIOS detects the 1.2 TB volume before use.
Även i den här avdelningen
Andra har jämfört dessa
Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.



