DELL
DELL KPM5XVUG3T84 3.84TB SAS enterprise SSD
A 3.84 TB SAS 12Gb/s 2.5" enterprise SSD with Gen 13 caddy for Dell PowerEdge servers
- 84 TB capacity supports large enterprise workloads
- SAS 12 Gb/s interface enables fast data transfer
- Mixed-use design balances read and write performance
- Gen 13 caddy included for direct server installation
- Compatible with Dell PowerEdge servers from R210 to R930
3.84 TB SAS 12 Gb/s enterprise SSD
This Dell KPM5XVUG3T84 is a 3.84 TB solid-state drive built for 12 Gb/s SAS backplanes. It ships new with a Gen 13 caddy that fits 2.5-inch bays in supported Dell PowerEdge servers. The mixed-use endurance profile suits read-heavy and balanced workloads in virtualisation, database and boot-volume roles. Capacity and interface speed are the defining figures for provisioning.
Suits admins upgrading compatible Dell PowerEdge
The drive fits the listed R210 through R930 models that accept a Gen 13 2.5-inch SAS carrier. Sites running older backplanes limited to 6 Gb/s SAS or servers without a 2.5-inch SAS slot will not be able to install this unit. Buyers needing a different form factor or a non-Dell carrier should look at other parts. No other compatibility claims are made.
SAS 12 Gb/s interface decides fit
The single specification that determines whether this SSD works in a given chassis is the 12 Gb/s SAS interface combined with the Gen 13 caddy. If the target server supports 12 Gb/s SAS and accepts the supplied carrier, the drive will connect at full speed. If the backplane or controller tops out at a lower SAS rate the drive will still function but at that lower rate.
I korthet
- 84 TB capacity supports large enterprise workloads
- SAS 12 Gb/s interface enables fast data transfer
- Mixed-use design balances read and write performance
- Gen 13 caddy included for direct server installation
- Compatible with Dell PowerEdge servers from R210 to R930
Specifikationer
Inga publicerade specifikationer för den här produkten än.
Frågor om den här produkten
How do I install the 2.5" SAS drive into the Gen 13 caddy and what step is often missed?
Slide the drive into the caddy until the connector seats, then secure the four screws; the step often missed is tightening all screws evenly so the SAS connector stays aligned.
What maintenance or replacement will the 3.84TB MU SSD need later?
Monitor SMART wear indicators; when the media‑wear metric approaches the rated endurance limit the drive should be replaced to avoid data loss.
What limit appears first on the 12Gb/s SAS interface under sustained mixed‑use workloads?
The 12Gb/s SAS link bandwidth saturates before the NAND write‑endurance threshold during continuous mixed‑use traffic.
Även i den här avdelningen
Andra har jämfört dessa
Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.
