Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Rectangular silver blade server module with front drive bays and handle

DELL

DELL PowerEdge M630 Blade 2x Xeon E5-2643 v4 256GB DDR4 2x 1.8TB SAS

SKU CH-EQZQ-711SW

Dual-socket blade server with two 3.4 GHz Xeon E5-2643 v4 processors, 256 GB DDR4 memory and dual 1.8 TB SAS drives in a 2.5" form factor

  • TypeBlade
  • CPU TypeIntel Xeon
  • CPU Speed3.4 GHz
  • # of Processors Installed2
  • MAX Processors2
  • Installed Memory Size256GB
  • Dual 3.4 GHz Xeon processors handle heavy compute workloads
  • 256 GB DDR4 memory supports large virtualisation environments
  • 2 x 1.8 TB SAS drives deliver high-capacity local storage
  • PERC H330 RAID controller protects data with hardware redundancy
  • iDRAC8 Enterprise enables remote server management

Ready-to-deploy blade server

The Dell PowerEdge M630 arrives as a complete blade unit with two Xeon E5-2643 v4 processors running at 3.4 GHz and 256 GB of DDR4 ECC registered memory. Two 1.8 TB SAS hard drives are installed behind a PERC H330 RAID controller. Integrated 10 GbE networking and iDRAC8 Enterprise remote management are included. Firmware is updated to the latest stable release before shipment.

Suits dense compute clusters

This configuration targets workloads that need high core-count CPUs and large memory capacity within a half-height blade form factor. Buyers who need more than two internal 2.5-inch drives should look at a different chassis. The fixed CPU count of two sockets means the platform cannot scale beyond the installed processors. GPU-accelerated workloads are not supported because only integrated graphics are present.

512 GB maximum memory capacity

The system board supports up to 512 GB of DDR4 across its DIMM slots, so the installed 256 GB can be doubled if the application demands it. This ceiling is the single figure that determines whether the blade can grow with your dataset or whether a larger platform is required.

I korthet

  • Dual 3.4 GHz Xeon processors handle heavy compute workloads
  • 256 GB DDR4 memory supports large virtualisation environments
  • 2 x 1.8 TB SAS drives deliver high-capacity local storage
  • PERC H330 RAID controller protects data with hardware redundancy
  • iDRAC8 Enterprise enables remote server management

Specifikationer

BrandDELL
SeriesPowerEdge
ModelBlade
TypeBlade
CPU TypeIntel Xeon
CPU Speed3.4 GHz
# of Processors Installed2
MAX Processors2
Installed Memory Size256GB
Memory TypeDDR4 SDRAM
Max Memory Capacity512GB
Hard Drive (Installed)3,60
Storage ControllerDell PERC H330 SAS Storage Controller
HDD InterfaceSAS
GPU TypeIntegrated Graphics
Remote ManagementiDRAC8 Enterprise
Dimensions22 x 22x 10 in
Weight20

Frågor om den här produkten

What comes in the box with the M630 blade and what must be sourced separately?

The blade ships with two Xeon E5-2643 v4 CPUs, 256 GB DDR4 ECC registered memory, two 1.8 TB SAS hard drives and a PERC H330 RAID controller; rails are available on request and the enclosure is not included.

Should I pick the 256 GB configuration or expand to the 512 GB maximum?

256 GB DDR4 is installed across the available slots; reaching 512 GB would require replacing modules with higher-capacity DDR4 ECC registered DIMMs.

How does the 3.4 GHz clock on the E5-2643 v4 perform inside the M630?

Each of the two six-core processors runs at 3.4 GHz with 20 MB cache, delivering strong single-thread speed for database and virtualization workloads within the blade form factor.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.