DELL PowerEdge M640 Blade Server 2x Xeon Gold 6150 18C 16GB 2x 1.92TB SSD H330 57810S-K iDRAC9 Enterprise
- Blade
- Blade
Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.
DELL
Half-height blade server with dual 18-core Xeon Gold 6150 CPUs, 64 GB DDR4, dual 960 GB SSDs, H330 RAID, 10 Gb dual-port networking and iDRAC9 Enterprise
SSD (Installed) 2 x 960GB SATA SSD
The Dell PowerEdge M640 is a half-height blade server that fits the PowerEdge MX and M1000e chassis. It ships with two Intel Xeon Gold 6150 processors, each running 18 cores at 2.70 GHz with a 3.7 GHz turbo frequency. Installed memory is 64 GB of DDR4 across four 16 GB modules, leaving twelve slots open for expansion up to 1.5 TB. The PERC H330 controller manages two 960 GB SATA SSDs in a 2.5-inch bay.
This blade targets virtualisation, private cloud and high-performance computing clusters that need maximum CPU density per rack unit. The dual 18-core configuration and large memory ceiling support heavy multi-threaded workloads. Buyers who need GPU acceleration, local NVMe storage or a standalone tower or rack-mount form factor should look elsewhere because the half-height blade design excludes full-length add-in cards and requires a compatible MX or M1000e enclosure.
The decisive specification is the pair of Intel Xeon Gold 6150 processors delivering 36 total cores at 2.70 GHz base and 3.7 GHz turbo. This core count and frequency determine whether the blade meets the throughput requirements for your virtualisation host or compute cluster. All other resources — memory slots, drive bays and the 10 Gb dual-port network card — scale around this CPU foundation.
| Brand | DELL |
|---|---|
| Series | PowerEdge M640 |
| Type | Blade |
| Rack Height | Blade |
| CPU Type | Intel Xeon |
| CPU Speed | 2.70 GHz |
| CPU Socket | LGA 3647 |
| Number of CPU Cores | 18-Core Processor |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 64GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 2TB |
| Number of Memory Slots | 16 |
| Storage Controller | Dell Perc H330 Controller |
| HDD Interface | SATA/SAS |
| SSD (Installed) | 2 x 960GB SATA SSD |
| Raid Level | RAID 0/1/5/10/50 |
| GPU Type | Matrox G200 |
| Video Memory | 8MB |
| Ethernet Controller | Dell Broadcom 57810S-K 10Gb Dual Port Blade Network Daughter Card |
| Management Port | RJ 45 |
| Operating System | No |
Andra versioner av den här modellen
Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.
Slide the half-height blade into an empty bay until the latch clicks, then use the iDRAC9 Enterprise interface to inventory the server and update firmware before powering on the operating system.
The two 960GB SATA SSDs have a finite write endurance; monitor their SMART health via iDRAC9 and plan replacement when the media-wear indicator approaches the rated limit.
The blade's shared cooling and chassis power budget will throttle the 2.7 GHz base frequency before sustained 3.7 GHz all-core turbo can be maintained.
Även i den här avdelningen
Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.
Det du betalar med, och det du ser priserna i.
Skickas från din plånbok i kassan
Endast visning — katalogen är prissatt i US-dollar
Ingen valuta matchar.
Välj det språk du vill att webbplatsen ska visas på.
Inga språk matchar.
Ny här?
Har du redan ett konto?
Det finns ingen automatisk återställning: den här butiken skickar inga e-postmeddelanden, så det finns ingen engångslänk att begära. Lämna adressen kopplad till kontot, så hanteras den för hand.
Förfrågan noterad
Inget är på väg till din inkorg — den här butiken skickar aldrig e-post. Någon tar hand om detta manuellt.
Kom du på det?