NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.
E-POWER
Mid-tower case fits ATX and Micro-ATX boards, holds one 5.25-inch drive plus two 3.5-inch and two 2.5-inch bays, and supports graphics cards up to 360 mm
The E-POWER EP-2002BB is a mid-tower chassis that accepts ATX and Micro ATX motherboards. Its SPCC steel construction and plain black finish suit office or home builds that do not require a windowed side panel. Builders who want extensive liquid-cooling support or a tempered-glass showcase should look elsewhere.
A rear 120mm fan is included and the layout allows optional 120mm fans at the front, side and bottom. The power supply mounts at the bottom, separating its heat from the main chamber. Maximum graphics-card length is 360mm and CPU cooler height is limited to 160mm, so component choice must respect those clearances.
The case provides one external 5.25in bay, two internal 3.5in bays and two internal 2.5in bays for storage flexibility. Front-panel I/O consists of one USB 3.0 port, one USB 2.0 port and HD audio jacks. Seven expansion slots accommodate full-length add-in cards, while the solid side panel keeps the interior hidden.
| Brand | E-POWER |
|---|---|
| Series | 2002BB |
| Model | EP-2002BB |
| Type | ATX / Micro ATX Mid Tower |
| Color | Black |
| Case Material | SPCC |
| With Power Supply | No |
| Power Supply Mounted | Bottom |
| Motherboard Compatibility | ATX / Micro ATX |
| Side Panel | without Side Window |
| LED | Non-LED |
| External 5.25" Drive Bays | 1 |
| Internal 3.5" Drive Bays | 2 |
| Internal 2.5" Drive Bays | 2 |
| Expansion Slots | 7 |
| Front Ports | USB 2.0 / USB 3.0 / Audio |
| Fan Options | Bottom - 1 x 120mm |
| Max GPU Length | 360mm |
| Max CPU Cooler Height | 160 mm |
Align the ATX or Micro ATX board with the pre-drilled standoff holes, screw in all required standoffs first, then secure the board; the step often missed is installing every standoff that matches the motherboard holes before placing the board.
The front USB 2.0, USB 3.0 and audio ports can wear from repeated plugging; the two 3.5" and two 2.5" drive bays may need drive swaps; any installed 120mm fans at front, side, bottom or rear should be cleaned or replaced when noisy.
The CPU cooler height is capped at 160mm and the GPU length at 360mm, so a tall cooler or long card restricts airflow first; the single rear 120mm exhaust and optional front, side and bottom 120mm intakes set the practical cooling ceiling.
Även i den här avdelningen
Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.
Det du betalar med, och det du ser priserna i.
Skickas från din plånbok i kassan
Endast visning — katalogen är prissatt i US-dollar
Ingen valuta matchar.
Välj det språk du vill att webbplatsen ska visas på.
Ny här?
Har du redan ett konto?
Det finns ingen automatisk återställning: den här butiken skickar inga e-postmeddelanden, så det finns ingen engångslänk att begära. Lämna adressen kopplad till kontot, så hanteras den för hand.
Förfrågan noterad
Inget är på väg till din inkorg — den här butiken skickar aldrig e-post. Någon tar hand om detta manuellt.
Kom du på det?