Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Orange flexible TPU filament on a spool, 2.85 mm diameter, 500 g weight

E3D Online

E3D Online FleXD TPU Filament 2.85mm 500g Sweet Orange17

SKU CH-FD0T-Z11JB

Semi-flexible TPU filament in 2.85 mm diameter, 500 g spool, prints at 220-240 °C with high abrasion resistance and vibrant orange colour

  • ColorOrange
  • TypeFilament
  • Easy printing with a 30 % speed guideline and 2.85 mm diameter
  • High shear strength for durable, functional parts
  • High abrasion resistance extends the life of printed items
  • Elastic flexibility enables bendable designs like phone covers and insoles
  • Rich solid orange color from naturally transparent filament with vibrant pigmentation

Filament for shock-absorbing prints

E3D Online FleXD TPU Filament in Sweet Orange17 is a semi-flexible material designed for parts that need elasticity and high abrasion resistance. The 2.85 mm diameter spool weighs 500 g and prints with rich, solid colour vibrancy thanks to its naturally transparent base. It suits makers producing phone covers, keyboard protectors, insoles or flexible prototypes.

Upgrade from rigid or brittle filaments

Switching to FleXD is worth it when your current PLA, PETG or standard TPU cracks under repeated bending or wears too quickly in high-friction areas. The material delivers high shear strength and maintains layer adhesion at 30 % speed around 15 mm/s, so functional prints survive impacts that would shatter harder plastics. It also works with spoolWorks Scaffold support that dissolves in tap water.

Check printer compatibility before ordering

Verify your extruder handles 2.85 mm filament and can reach a nozzle temperature between 220 and 240 °C. The heated bed must support 45 to 85 °C and you should have glue stick ready for bed adhesion. Because every printer behaves differently, be prepared to fine-tune settings for reliable results.

I korthet

  • Easy printing with a 30 % speed guideline and 2.85 mm diameter
  • High shear strength for durable, functional parts
  • High abrasion resistance extends the life of printed items
  • Elastic flexibility enables bendable designs like phone covers and insoles
  • Rich solid orange color from naturally transparent filament with vibrant pigmentation

Specifikationer

BrandE3D
ModelFleXD
ColorOrange
TypeFilament

Frågor om den här produkten

Does the 2.85 mm filament diameter work with my printer's extruder?

This spool is 2.85 mm diameter; verify your printer accepts that size before loading.

What nozzle temperature and bed temperature should I set for the first print?

Start with a nozzle temperature between 220 and 240 °C and a bed temperature between 45 and 85 °C.

How should I store the 500 g spool between prints to keep it printing well?

Keep the spool sealed with desiccant; TPU absorbs moisture and wet filament causes poor layer adhesion.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.