Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Aqua blue 3.0 mm duplex fibre cable with FC connectors, thirty metres long

Enfain

Enfain OM3 FC-FC Duplex Multimode Fibre Optic Cable 30m

SKU CH-C7HC-0GTRS

OM3 multimode duplex cable with FC connectors carries 10 Gb/s over 30 metres at 850 nm with 3.0 mm PVC jacket

Length 30m

  • Supports 10G, 40G and 1G networks with OM3 10-gigabit core
  • Low 0.2 dB typical insertion loss keeps signal strong over 30m
  • Return loss above 38 dB reduces reflections for cleaner data transfer
  • 0 mm PVC jacket and 330 mm bend radius suit tight rack routing
  • Rated for 1000 mating cycles and -20 °C to +60 °C operation

30 m OM3 duplex patch cord for 10 Gb links

This 30 metre OM3 multimode cable uses FC connectors on both ends and an 850 nm wavelength. It is built for 1 Gb, 10 Gb and 40 Gb Ethernet links in switches, servers and data-centre racks. The aqua jacket identifies the OM3 grade at a glance.

Sustained loss stays within tight limits

Typical insertion loss is .2 dB and maximum insertion loss is .3 dB across the full length, while return loss exceeds 38 dB. These figures hold during continuous traffic, so long runs in a live cabinet do not degrade the error rate. The 3.0 mm PVC sheath resists everyday handling without adding strain to the ferrules.

Verify FC ports and bend space before ordering

Both ends require female FC bulkheads; the cable will not mate with LC, SC or ST interfaces. The minimum bend radius is 330 mm, so allow enough slack in cable trays or patch panels to avoid sharp corners. Operating temperature spans -20 °C to 60 °C, and the connectors are rated for 1000 mating cycles.

I korthet

  • Supports 10G, 40G and 1G networks with OM3 10-gigabit core
  • Low 0.2 dB typical insertion loss keeps signal strong over 30m
  • Return loss above 38 dB reduces reflections for cleaner data transfer
  • 0 mm PVC jacket and 330 mm bend radius suit tight rack routing
  • Rated for 1000 mating cycles and -20 °C to +60 °C operation

Specifikationer

Inga publicerade specifikationer för den här produkten än.

Andra versioner av den här modellen

5 till i samma serie

Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.

Frågor om den här produkten

Does the cable generate heat or consume power during continuous operation?

No, it is a passive fibre-optic cable with no active components, so it produces no heat and draws no power.

What connectors must my equipment already have to use this FC-FC duplex patch cord?

Both ends require FC connectors; your switch, server or patch panel must provide matching FC ports.

Will this OM3 cable work with my older 1 Gbit OM1 or OM2 links?

Yes, it supports 1 Gbit, 10 Gbit and 40 Gbit speeds, so it is compatible with legacy 1 Gbit multimode equipment.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.