Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Black square axial fan 60 by 60 by 25 mm 24V 0.1A

Fans

Fans MMF-06F24ES-RP1Size 60x60x25mm 24V 0.1A case fan

SKU CH-RB4F-NJW06 MPN MMF-06F24ES-RP1Size

A 60 mm square axial fan moves air through a 25 mm frame at 24 V and 0.1 A

  • Space-saving 60 x 60 mm frame fits tight builds
  • Low 0.10 A draw keeps 24 V systems efficient
  • Axial design delivers focused airflow through heat exchangers
  • 25 mm slim profile allows installation in shallow enclosures
  • Quiet operation suits noise-sensitive medical and rail applications

Compact 24 V axial fan

This Mitsubishi MMF-06F24ES-RP1 is a 60 mm square axial fan built for 24 V DC systems. It suits industrial, medical and embedded equipment that need directed airflow in tight spaces. The low 0.10 A draw keeps power budgets modest.

Simple two-wire mounting

The fan uses a standard two-wire 24 V connection and fits a 60 × 60 mm cut-out with 25 mm depth. Verify polarity before powering; reversed voltage will not spin the rotor. Ensure the mounting surface is flat so the thin frame seats evenly.

24 V 0.10 A rating decides fit

The single specification that determines compatibility is the 24 V 0.10 A electrical rating. Systems running other voltages or requiring higher current must select a different model.

I korthet

  • Space-saving 60 x 60 mm frame fits tight builds
  • Low 0.10 A draw keeps 24 V systems efficient
  • Axial design delivers focused airflow through heat exchangers
  • 25 mm slim profile allows installation in shallow enclosures
  • Quiet operation suits noise-sensitive medical and rail applications

Specifikationer

Inga publicerade specifikationer för den här produkten än.

Frågor om den här produkten

How can I verify the 24V 0.1A fan is running correctly after installation?

Measure the supply voltage at the fan header to confirm 24V, then check that the current draw is close to 0.1A; the blades should spin smoothly without vibration or unusual noise.

What comes in the box and what must I source separately?

The package contains the 60x60x25mm axial fan only; you will need to provide a 24V power source, mounting screws and any required connector or wiring harness.

Which version of this 60mm 24V fan should I select for my application?

Only the MMF-06F24ES-RP1 model with 0.1A current rating is listed; choose it when your design calls for a 24V axial fan of 60x60x25mm dimensions.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.