Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Rectangular grey silicone mat with raised edges, 17.7 by 15 inches

Frezonika 3D Printer Mat Small 17.7 x 15 Inch Silicone 3D Printers Accessories

SKU CH-AE4Q-0NHZH

A 17.7 by 15 inch silicone mat with a raised edge that steadies the printer, contains spills and dampens vibration

  • TypeSilicone
  • SpecificationSilicone, 17.7 L x 15 W x 0.5 H inches, 0.7 ounces, 3D Print
  • FeaturesSilicone, 3D Printer
  • Stops the printer sliding on smooth desks thanks to anti-slip silicone
  • 1 cm raised lip contains resin spills and filament debris protecting furniture
  • Silicone layer dampens vibration and reduces resonant printing noise
  • Fits Flashforge, Comgrow, Elegoo, Bambulab and most other 3D printers
  • Wipes clean or rinses under water for quick mess-free maintenance

Small Silicone Mat for 3D Printers

The Frezonika 3D Printer Mat Small is a flexible silicone sheet sized 17.7 by 15 inches with a .5 inch height. It sits under the printer to keep the machine steady on smooth surfaces such as hardwood or desks. The .7 ounce mat suits hobbyists and small-workshop users who want a simple barrier between the printer and their furniture.

Place-and-Print Installation

Lay the mat flat on the chosen surface and set the printer on top; no adhesives, fasteners or tools are required. The raised edge runs the full perimeter to catch resin drips and filament scraps. If the desk is uneven the thin silicone cannot level the machine, and a printer larger than the mat footprint will overhang the protective lip.

Check Printer Footprint and Materials

Measure the printer’s base dimensions to confirm they fit within the 17.7 by 15 inch area so the raised edge remains effective. Verify that the printer’s weight and vibration level are compatible with a lightweight silicone pad. Ensure any cleaning agents you plan to use are safe for silicone before wiping or rinsing the mat.

I korthet

  • Stops the printer sliding on smooth desks thanks to anti-slip silicone
  • 1 cm raised lip contains resin spills and filament debris protecting furniture
  • Silicone layer dampens vibration and reduces resonant printing noise
  • Fits Flashforge, Comgrow, Elegoo, Bambulab and most other 3D printers
  • Wipes clean or rinses under water for quick mess-free maintenance

Specifikationer

BrandFrezonika
Model3D Printer Mat small
Part Number3D Printer Mat-Small-B
TypeSilicone
SpecificationSilicone, 17.7 L x 15 W x 0.5 H inches, 0.7 ounces, 3D Printer Mat small, 3D Printer Mat-Small-B
FeaturesSilicone, 3D Printer

Frågor om den här produkten

How do I know the mat is keeping my printer steady during a print?

The anti-slip silicone surface prevents sliding on smooth hardwood or desk surfaces, and the 1 cm raised edge contains resin spills and filament debris so the printer stays in place.

What comes in the box and do I need any extra items?

The box contains the 17.7 x 15 inch silicone mat with a 0.5 inch height and 1 cm raised edge; no additional accessories or tools are required for use.

Which size should I choose for my printer?

This small version measures 17.7 L x 15 W inches and fits most 3D printers including Flashforge, Comgrow, Elegoo and Bambulab models; two larger sizes are also available if your printer footprint exceeds these dimensions.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.