G.SKILL F4-3000C16D-16GTZR 16GB (2 x 8GB) DDR4 3000 CL16 desktop RAM
- 16GB (2 x 8GB)
- 288-Pin PC RAM
Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.
G.SKILL
32 GB quad-channel DDR4 kit at 3200 MT/s with CL16 timings, 1.35 V, and addressable RGB lighting
Capacity 32GB (4 x 8GB)
Speed DDR4 3200 (PC4 25600)
This quad-channel kit provides 32 GB of DDR4 memory across four 8 GB modules. It targets desktop builders who want matched sticks for AMD X399, TRX40, X570, X470 or B550 platforms and Intel X299, Z790 DDR4, Z690 DDR4, Z590 or Z490 platforms. The RGB light bar adds visual customisation without extra cables.
The kit runs at DDR4 3200 with a CAS latency of 16 and timings of 16-18-18-38 at 1.35 V. Intel XMP 2.0 loads those settings automatically. Mixing this kit with other modules is not supported because the sticks are validated as a matched set.
Aluminium heatspreaders with a fin array dissipate heat from the ICs during sustained loads. The modules draw 1.35 V, a standard DDR4 voltage that keeps power draw modest. No active cooling is required and the kit operates silently.
| Brand | G.SKILL |
|---|---|
| Series | TridentZ RGB Series |
| Model | F4-3200C16Q-32GTZR |
| Capacity | 32GB (4 x 8GB) |
| Type | 288-Pin PC RAM |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL16 |
| Timing | 16-18-18-38 |
| Voltage | 1.35V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Quad Channel Kit |
| BIOS/Performance Profile | Intel XMP 2.0 |
| Color | Black |
| Heat Spreader | Yes |
| Features | Sleek aluminum heatspreader design. Customizable RGB lighting support. Intel XMP 2.0 Support. Do not mix memory kits. Memory kits are sold in matched kits that are designed to run together as a set. Mixing memory kits will result in stability issues or system failure. Memory kits will boot at the SPD speed at default BIOS settings with compatible hardware. For memory kits with XMP, enable XMP/DOCP/A-XMP in BIOS to reach the rated potential XMP overclock speed of the memory kit, subject to the use of compatible hardware. Reaching the rated XMP overclock speed and system stability will |
| Recommend Use | AMD X399 / TRX40 / X570 / X470 / B550 Intel X299 / Z790 DDR4 / Z690 DDR4 / Z590 / Z490 |
| LED Color | RGB |
| Fraktvikt | 0.41 kg |
| Paketstorlek | 160 × 137 × 28 mm |
Andra versioner av den här modellen
Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.
The kit runs at 3200 MT/s with 16-18-18-38 timings at 1.35 V, so the memory controller sees a 3200 MT/s data rate and 16-cycle CAS latency once XMP 2.0 is enabled in BIOS.
The 288-pin DDR4 modules operate at 3200 MT/s (PC4-25600) when the board's memory controller and BIOS support that data rate; the DDR4 standard itself caps at the JEDEC-defined speeds the platform allows.
Each module uses an aluminum heatspreader with an exposed RGB light bar on top, so the cooler or chassis must provide enough vertical room for the full finned height above the 288-pin connector.
Även i den här avdelningen
Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.
Det du betalar med, och det du ser priserna i.
Skickas från din plånbok i kassan
Endast visning — katalogen är prissatt i US-dollar
Ingen valuta matchar.
Välj det språk du vill att webbplatsen ska visas på.
Inga språk matchar.
Ny här?
Har du redan ett konto?
Det finns ingen automatisk återställning: den här butiken skickar inga e-postmeddelanden, så det finns ingen engångslänk att begära. Lämna adressen kopplad till kontot, så hanteras den för hand.
Förfrågan noterad
Inget är på väg till din inkorg — den här butiken skickar aldrig e-post. Någon tar hand om detta manuellt.
Kom du på det?