G.SKILL Ripjaws V F4-3600C19D-32GVRB 32GB (2x16GB) DDR4 3600 CL19 desktop RAM
- 32GB (2 x 16GB)
- 288-Pin PC RAM
Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.
G.SKILL
A 128GB quad-channel DDR4 kit running at 3600MHz with CL18 timings and a low-profile 42mm black heatspreader
Capacity 128GB (4 x 32GB)
Speed DDR4 3600 (PC4 28800)
CAS Latency · Color · Fan Included CL18 · Black · No
This Ripjaws V kit provides 128 GB across four matched 32 GB modules running at DDR4 3600 with CL18 timings. It targets enthusiasts and professionals building high-capacity workstations on Intel X299, Z590, Z490, Z390 or AMD TRX40 and X570 platforms. The unbuffered, non-ECC DIMMs operate at 1.35 V and include Intel XMP 2.0 profiles for one-click configuration.
DDR4 3600 (PC4-28800) defines the maximum JEDEC data rate and voltage envelope for these modules; tighter timings such as 18-22-22-42 require motherboard and CPU memory-controller support beyond base specifications. The 288-pin interface fits only DDR4 sockets, and the 42 mm module height clears most oversized CPU coolers. Mixing this kit with other modules is not validated and can prevent the system from reaching the rated speed.
Each 32 GB rank configuration demands a memory controller capable of addressing high-density DRAM at 3600 MT/s; older chipsets or entry-level CPUs may limit the kit to lower frequencies or fail to POST. Verify that the specific motherboard QVL lists this exact part number before purchase.
| Brand | G.SKILL |
|---|---|
| Series | Ripjaws V Series |
| Model | F4-3600C18Q-128GVK |
| Capacity | 128GB (4 x 32GB) |
| Type | 288-Pin PC RAM |
| Speed | DDR4 3600 (PC4 28800) |
| CAS Latency | CL18 |
| Timing | 18-22-22-42 |
| Voltage | 1.35V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| BIOS/Performance Profile | Intel XMP 2.0 |
| Color | Black |
| Heat Spreader | Yes |
| Features | Overclock performance DDR4 memory designed for compatible Intel platforms. Sleek and stylish aluminum heatspreader design. Intel XMP 2.0 support. Do not mix memory kits. Memory kits are sold in matched kits that are designed to run together as a set. Mixing memory kits will result in stability issues or system failure. Memory kits will boot at the SPD speed at default BIOS settings with compatible hardware. For memory kits with XMP, enable XMP/DOCP/A-XMP in BIOS to reach the rated potential XMP overclock speed of the memory kit, subject to the use of compatible hardware. Reaching the |
| Recommend Use | AMD TRX40 / X570 Intel X299 / Z590 / Z490 / Z390 |
| Fraktvikt | 0.35 kg |
| Paketstorlek | 155 × 140 × 28 mm |
Andra versioner av den här modellen
Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.
The modules are 42 mm tall, a height designed to clear most oversized heatsinks.
Yes, the kit includes an Intel XMP 2.0 profile that sets 3600 MT/s, CL18 timings and 1.35 V automatically in the BIOS.
G.SKILL lists AMD TRX40 and X570, plus Intel X299, Z590, Z490 and Z390 chipsets as recommended platforms.
Även i den här avdelningen
Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.
Det du betalar med, och det du ser priserna i.
Skickas från din plånbok i kassan
Endast visning — katalogen är prissatt i US-dollar
Ingen valuta matchar.
Välj det språk du vill att webbplatsen ska visas på.
Inga språk matchar.
Ny här?
Har du redan ett konto?
Det finns ingen automatisk återställning: den här butiken skickar inga e-postmeddelanden, så det finns ingen engångslänk att begära. Lämna adressen kopplad till kontot, så hanteras den för hand.
Förfrågan noterad
Inget är på väg till din inkorg — den här butiken skickar aldrig e-post. Någon tar hand om detta manuellt.
Kom du på det?