Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Two matte-white DDR5 UDIMM sticks with RGB light bars

G.SKILL

G.SKILL F5-6000J3040G32GX2-RM5RW DDR5 64GB (2x32GB) 6000MT/s CL30 desktop RAM

SKU CH-FFMD-78YXZ MPN F5-6000J3040G32GX2-RM5RW

64 GB dual-channel DDR5 kit at 6000 MT/s with CL30 latency and RGB lighting in matte white

  • 64 GB capacity handles heavy multitasking with two 32 GB modules
  • 6000 MT/s speed and CL30 latency deliver responsive performance
  • Intel XMP 3.0 profile enables rated overclock with one BIOS setting
  • Designed for Intel 600, 700, 800 chipsets with 12th, 13th, 14th Gen and Core Ultra 200 CPUs
  • Matte white heatspreader with RGB lighting suits clean, illuminated builds

64GB DDR5 kit for Intel platforms

This 64GB dual-channel kit uses two 32GB DDR5 modules rated at 6000MT/s with CL30-40-40-96 timings at 1.40V. It targets Intel 600, 700 and 800 series chipsets paired with 12th, 13th or 14th Gen Intel Core or Intel Core Ultra 200 Series CPUs. XMP 3.0 profiles must be enabled in the BIOS to reach the rated speed. Buyers who need ECC error correction or smaller capacity modules should look elsewhere.

Thermals and power in normal use

The matte-white aluminium heatspreader dissipates heat from the DDR5 ICs during sustained workloads. At the rated 1.40V the modules draw only the power required for 6000MT/s operation, keeping thermals manageable inside typical desktop airflow. No active cooling is included, so case ventilation must handle the memory heat. Noise is limited to the system fans already present in the build.

CL30 latency at 6000MT/s

The decisive specification is the CL30 CAS latency at the 6000MT/s data rate, which determines responsiveness in latency-sensitive applications. Achieving this timing requires a motherboard and CPU combination validated on the G.Skill QVL. Mixing this kit with other memory kits will cause instability or failure to boot.

I korthet

  • 64 GB capacity handles heavy multitasking with two 32 GB modules
  • 6000 MT/s speed and CL30 latency deliver responsive performance
  • Intel XMP 3.0 profile enables rated overclock with one BIOS setting
  • Designed for Intel 600, 700, 800 chipsets with 12th, 13th, 14th Gen and Core Ultra 200 CPUs
  • Matte white heatspreader with RGB lighting suits clean, illuminated builds

Specifikationer

Inga publicerade specifikationer för den här produkten än.

Frågor om den här produkten

How do I install the 2x32GB Ripjaws M5 RGB modules and enable the 6000MT/s CL30 XMP 3.0 profile?

Insert both sticks into the motherboard's dual-channel slots, then enter BIOS and enable the Intel XMP 3.0 profile to reach the rated 6000MT/s CL30-40-40-96 speed at 1.40V; mixing with other kits is not supported.

What maintenance will the DDR5 64GB kit need over time?

No scheduled maintenance is required; keep the matte-white heatspreader free of dust and ensure case airflow stays adequate so the modules run at their specified 1.40V without thermal throttling.

What limit appears first during sustained heavy workloads on this 6000MT/s CL30 memory?

The primary limit is the motherboard and CPU memory controller's ability to hold the XMP 3.0 profile stable at 1.40V; if the platform cannot sustain the rated timings, the system will downclock or become unstable.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.