BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.
G.SKILL
Dual-channel 48 GB DDR5 kit at 8400 MT/s with CL40 timings and a built-in clock driver for signal stability
This kit delivers 48 GB across two 24 GB modules in a dual-channel configuration. It is built for enthusiasts and overclockers who want maximum throughput on Intel Core Ultra 200 K-series platforms. The 288-pin CU-DIMM form factor fits standard desktop DIMM slots.
A built-in clock driver chip on each module strengthens the clock signal from the memory controller to the DRAM. This improves stability at high frequency and reduces the burden on motherboard trace routing. The kit relies on Intel XMP 3.0 profiles for one-click configuration on Z890 chipset motherboards.
Rated at DDR5 8400 with timings of 40-52-52-134 at 1.40 V, the modules provide substantial frequency headroom for memory-intensive workloads. The 1.40 V operating voltage is the upper bound for daily use; pushing beyond the validated profile requires advanced cooling and motherboard support not covered by the XMP profile.
| Brand | G.SKILL |
|---|---|
| Series | Trident Z5 CK |
| Model | F5-8400C4052G24GX2-TZ5CRK |
| Capacity | 48GB (2 x 24GB) |
| Type | 288-Pin PC RAM |
| Speed | DDR5 8400 (PC5 67200) |
| CAS Latency | CL40 |
| Timing | 40-52-52-134 |
| Voltage | 1.40V |
| Multi-channel Kit | Dual Channel Kit |
| BIOS/Performance Profile | Intel XMP 3.0 |
| Color | Black |
| Heat Spreader | Yes |
| Features | Extreme performance DDR5 memory designed for gaming and PC enthusiasts Built-in clock driver (CKD) chip Customizable RGB lighting support Designed for use with the latest Intel Core Ultra desktop processors and compatible motherboards that support CU-DIMM memory. Intel XMP 3.0 Support Do not mix memory kits. Memory kits are sold in matched kits that are designed to run together as a set. Mixing memory kits will result in stability issues or system failure. Memory kits will boot at the SPD speed at default BIOS settings with compatible hardware. For memory kits with XMP, enable XMP pr |
| Recommend Use | Intel 800 Series Chipset Intel® Core™ Ultra 200 Series Desktop Processors |
| LED Color | RGB |
| Fraktvikt | 0.18 kg |
| Paketstorlek | 178 × 140 × 25 mm |
Yes, the modules use the standard 288-pin DDR5 form factor and will install in any desktop board with DDR5 DIMM slots.
The kit is developed for Intel 800 series chipsets, specifically Z890, and Intel Core Ultra 200 K-series desktop processors.
The kit includes an Intel XMP 3.0 profile that sets the 8400 MT/s speed, CL40 timings and 1.40 V voltage automatically when enabled in the BIOS.
Även i den här avdelningen
Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.
Det du betalar med, och det du ser priserna i.
Skickas från din plånbok i kassan
Endast visning — katalogen är prissatt i US-dollar
Ingen valuta matchar.
Välj det språk du vill att webbplatsen ska visas på.
Inga språk matchar.
Ny här?
Har du redan ett konto?
Det finns ingen automatisk återställning: den här butiken skickar inga e-postmeddelanden, så det finns ingen engångslänk att begära. Lämna adressen kopplad till kontot, så hanteras den för hand.
Förfrågan noterad
Inget är på väg till din inkorg — den här butiken skickar aldrig e-post. Någon tar hand om detta manuellt.
Kom du på det?