Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Three white 140mm case fans with dual ARGB light rings and rubber corners

Geometric Future

Geometric Future Squama 2503 140mm ARGB PWM case fan 3-pack White

SKU CH-CEMZ-MFZ0X

Three white 140 mm PWM fans with addressable RGB dual light loops, hydro dynamic bearings and anti-vibration pads deliver 91.15 CFM at up to 2400 RPM while staying as quiet as 34 dB(A)

  • Fan Size140mm
  • Fan Thickness25
  • Bearing TypeHydro Dynamic Bearings
  • RPM800~2400
  • Air Flow91.15
  • Air Pressure2.63

Color White

Model Squama 2503 140x25mm Standard

Option 3 Packs

  • Quiet cooling with 34 dB(A) peak noise
  • High airflow of 91.15 CFM at 2400 RPM
  • Strong 2.63 mm H₂O static pressure for radiators
  • Hydro Dynamic Bearings for smooth, durable operation
  • Dual addressable RGB light rings sync via 5 V 3-pin header

Squama 2503 140mm ARGB PWM fan trio

The pack contains three 140mm white frame fans with addressable RGB lighting on dual loops. Hydro Dynamic Bearings spin between 800 and 2400 RPM delivering 91.15 CFM airflow at 2.63 mm H₂O pressure. Maximum noise is rated at 34 dB(A) for a balanced performance and silent profile.

Compatibility check before ordering

Verify that your chassis or radiator has 140mm mounting holes with 25mm thickness clearance. Ensure the motherboard or controller provides a 4-pin PWM header for speed control and a 5V 3-pin addressable RGB header for lighting sync. Confirm the case layout allows cable routing for both connectors without strain.

Sustained-load behaviour

The Hydro Dynamic Bearings maintain consistent RPM under continuous load without the wear spike of sleeve designs. PWM curves keep speeds in the 800 to 2400 RPM range so airflow and pressure stay stable during long rendering or gaming sessions. Anti-vibration rubber pads dampen resonance that can amplify over time at higher speeds.

I korthet

  • Quiet cooling with 34 dB(A) peak noise
  • High airflow of 91.15 CFM at 2400 RPM
  • Strong 2.63 mm H₂O static pressure for radiators
  • Hydro Dynamic Bearings for smooth, durable operation
  • Dual addressable RGB light rings sync via 5 V 3-pin header

Specifikationer

Fan Size140mm
Fan Thickness25
Bearing TypeHydro Dynamic Bearings
RPM800~2400
Air Flow91.15
Air Pressure2.63
Noise Level34
Power ConnectorPWM 4Pin
ColorWhite
LEDAddressable RGB
Dimensions140mm

Andra versioner av den här modellen

5 till i samma serie

Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.

Frågor om den här produkten

Does the 3-pack include the 5 V 3-pin ARGB cables or must they be bought separately?

The three 140 mm fans ship with both the 4-pin PWM power connectors and the 5 V 3-pin addressable RGB connectors attached, so no extra cables are required.

Should I choose the 800 rpm floor or the 2400 rpm ceiling for a quiet build?

The fan runs from 800 to 2400 rpm via PWM; at the lower end it stays near 34 dB(A) for silent operation, while the top speed delivers 91.15 CFM and 2.63 mm H₂O for heavy cooling.

What does the 91.15 CFM figure mean once the fans are mounted on a 140 mm radiator?

At 2400 rpm the fan pushes 91.15 CFM with 2.63 mm H₂O static pressure, giving strong airflow through dense radiator fins while the hydro dynamic bearing keeps noise low.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.