Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Rectangular ATX power supply unit with single fan and reduced depth profile

Gulfe

Gulfe ATX Power Supply for HP Pavilion HPE Elite h8 1400Z

SKU CH-1VBY-FKX4P

ATX power supply with reduced depth for HP Pavilion HPE Elite h8 1400Z compatibility

  • TypeATX
  • Fans1
  • Weight2.5
  • Direct replacement for HP Pavilion HPE Elite h8 1400Z
  • Reduced depth ATX form factor fits tighter cases at 5.9" height
  • Dual voltage input 115/230 V works worldwide
  • Over-current and over-power protection safeguards components
  • 24-pin ATX, 4-pin CPU, three SATA and two LP4 connectors included

Direct Replacement for HP Pavilion HPE Elite h8

This Gulfe ATX power supply is built as a direct replacement for the HP Pavilion HPE Elite h8 1400Z desktop. It fits the original mounting points and connector layout. The unit is new and includes over-current and over-power protection. Reduced depth improves compatibility with tight chassis spaces.

Upgrades Legacy Units with Modern Connectors

It replaces several older legacy power supplies that lack current connector types. The jump is worth it when the original unit fails or cannot drive modern SATA devices. A 24-pin ATX connector, a 4-pin P4-12V connector, three SATA 15-pin connectors, two LP4 4-pin connectors and one floppy 4-pin connector are provided.

Limited by ATX Specification and Fixed Cable Set

The practical limits come from the ATX form factor and the fixed cable set included. Output rails deliver +5V, -5V, +12V1, +12V2, +3.3V, -12V and +5V-SB. Input voltage ranges are 115/230 V at 47–63 Hz. Hold-up time is 17 ms minimum at nominal load. Rise time is less than 70 ms.

I korthet

  • Direct replacement for HP Pavilion HPE Elite h8 1400Z
  • Reduced depth ATX form factor fits tighter cases at 5.9" height
  • Dual voltage input 115/230 V works worldwide
  • Over-current and over-power protection safeguards components
  • 24-pin ATX, 4-pin CPU, three SATA and two LP4 connectors included

Specifikationer

BrandGulfe
TypeATX
Fans1
Weight2.5

Frågor om den här produkten

What are the exact dimensions I need to clear for this ATX reduced-depth unit?

The power supply measures 5.86 inches deep by 3.3 inches wide with a height of 5.9 inches and width of 3.4 inches.

Which cables must I connect during installation, and which connector is often missed?

Attach the 24-pin ATX, 4-pin P4-12V, three SATA 15-pin, two LP4 4-pin, and one floppy 4-pin; the 4-pin P4-12V near the CPU socket is frequently overlooked.

When should I plan to replace the single cooling fan?

Expect to swap the fan when bearing noise appears or airflow drops, typically after several years of continuous operation.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.