HP
HP 841500-001 1.6TB SAS 12Gb/s 2.5-inch internal SSD
1.6 TB SAS 12 Gb/s 2.5-inch internal SSD for ProLiant GEN9 and GEN10 servers
- Device TypeInternal Solid State Drive (SSD)
- Weight3.0000
- 6 TB capacity supports large enterprise workloads
- SAS 12 Gb/s interface delivers high-throughput data transfer
- 5-inch form factor fits ProLiant Gen9 and Gen10 drive bays
- MLC flash provides mixed-use endurance for read-write balance
1.6TB SAS SSD for ProLiant servers
This internal solid state drive provides 1.6TB of MLC flash storage with a 12Gb/s SAS interface. It is built in a 2.5-inch form factor for HP ProLiant Gen9 and Gen10 servers. The drive targets mixed-use workloads that demand consistent read and write performance.
Practical limits of the 12Gb/s SAS interface
The SAS 12Gb/s link caps maximum throughput at the bus level, so sustained speeds cannot exceed that bandwidth. Cable length and backplane design also affect signal integrity at this rate. Buyers who need higher throughput must move to a faster interface standard. Systems limited to 6Gb/s SAS will operate the drive at the lower speed.
I korthet
- 6 TB capacity supports large enterprise workloads
- SAS 12 Gb/s interface delivers high-throughput data transfer
- 5-inch form factor fits ProLiant Gen9 and Gen10 drive bays
- MLC flash provides mixed-use endurance for read-write balance
Specifikationer
| Device Type | Internal Solid State Drive (SSD) |
|---|---|
| Weight | 3.0000 |
Frågor om den här produkten
Should I pick the 1.6TB version or a different capacity for my ProLiant Gen9 or Gen10 server?
The 1.6TB capacity matches the 841500-001 part number and fits the 2.5-inch bay used in ProLiant Gen9 and Gen10 servers.
What does the 12Gb/s SAS rating mean once the drive is installed in a server?
It indicates the maximum interface transfer rate between the SSD and the SAS controller when the server is running.
Även i den här avdelningen
Andra har jämfört dessa
Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.
