Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Rectangular metal power supply unit with ventilation grille and label showing 1050 W 54 V DC

HP

HP Aruba Networking X372 54 V DC 1050 W Power Supply

SKU CH-NQWE-CPGVH

Delivers 1050 W at 54 V DC from 110–240 V AC input for Aruba networking equipment

  • Works worldwide with 110-240 V AC input
  • Delivers stable 54 V DC for Aruba gear
  • High 1050 W output powers demanding switches
  • Dual 120 V and 230 V AC compatibility
  • Model X372 designed for Aruba networking equipment

Aruba X372 1050 W power supply

The HP Aruba Networking X372 delivers 1050 W at 54 V DC for compatible network equipment. It accepts 110-240 V AC input at 120 V or 230 V, making it suitable for standard mains supplies worldwide. Network administrators deploying Aruba switches or controllers that require a 54 V DC source will find this unit matches the specified power budget.

Hot-plug installation into supported chassis

The supply slides into the dedicated power-supply bay of a compatible Aruba chassis and locks with the integrated latch. No tools or cable routing are required because the DC output connects directly through the chassis backplane. The most common issue is attempting to fit the unit into a chassis that expects a different output voltage or wattage, which prevents the latch from engaging or causes the system to report a power-supply mismatch.

Verify chassis compatibility and voltage requirement

Before ordering, confirm that your Aruba chassis lists the X372 as a supported power supply and that the equipment requires a 54 V DC input. Check the chassis documentation for the maximum number of supplies allowed and whether redundant or combined power mode is used. Do not use this unit with hardware that expects a different DC voltage or a lower wattage rating.

I korthet

  • Works worldwide with 110-240 V AC input
  • Delivers stable 54 V DC for Aruba gear
  • High 1050 W output powers demanding switches
  • Dual 120 V and 230 V AC compatibility
  • Model X372 designed for Aruba networking equipment

Specifikationer

Inga publicerade specifikationer för den här produkten än.

Frågor om den här produkten

How can I verify the X372 power supply is delivering the rated 54 V DC output after installation?

Measure the DC output terminals with a multimeter set to DC voltage; a reading at or near 54 V under load confirms the unit is operating within specification.

What comes in the box with the Aruba Networking X372 1050 W supply, and are any cables or mounting brackets sold separately?

The package contains the power supply module only; AC power cords, DC output cables and rack-mount hardware are not included and must be sourced separately.

Which input-voltage version of the X372 should I choose for a site that provides both 120 V AC and 230 V AC mains?

This single unit accepts the full 110–240 V AC range, so it operates on either 120 V AC or 230 V AC without needing a different model.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.