Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Compact white tower server with four front drive bays

HPE

HPE ProLiant MicroServer Gen10 Plus v2 Tower Server Xeon E-2314 2.8GHz 64GB DDR4 16TB SATA HDD

SKU CH-Q3WV-T8WNM

Compact tower server with a Xeon E-2314 processor, 64GB DDR4 memory and 16TB SATA storage, plus iLO remote management

  • Xeon E-2314 4-core 2.8GHz up to 4.5GHz turbo for responsive compute
  • 64GB DDR4 3200MHz in two 32GB modules for ample multitasking headroom
  • 16TB across four 3.5in 4TB SATA drives for high-capacity storage
  • Smart Array VROC RAID protects data across multiple disks
  • iLO dedicated NIC gives remote out-of-band management access

Tower Server for Small Business

The HPE ProLiant MicroServer Gen10 Plus v2 is a tower server built for small-business workloads. It ships with a Xeon E-2314 four-core processor running at 2.8 GHz with 4.5 GHz turbo, 64 GB of DDR4 memory and 16 TB of SATA hard-drive storage. The system includes integrated iLO remote management and an embedded four-port 1 Gb network controller.

Suits Small Business; Not for Rack

This server suits small businesses that want a quiet tower form factor with local storage and remote management. It does not suit buyers who need a rack-mount chassis, higher drive-bay density or redundant power supplies. Organisations requiring GPU acceleration or larger memory capacity should look at other platforms.

16 TB SATA Storage Capacity

The storage subsystem provides 16 TB across four 4 TB SATA III 3.5-inch hard drives managed by a Smart Array VROC controller. Drives and memory modules are supplied separately and require installation before use. This capacity determines whether the server can hold the required data set.

I korthet

  • Xeon E-2314 4-core 2.8GHz up to 4.5GHz turbo for responsive compute
  • 64GB DDR4 3200MHz in two 32GB modules for ample multitasking headroom
  • 16TB across four 3.5in 4TB SATA drives for high-capacity storage
  • Smart Array VROC RAID protects data across multiple disks
  • iLO dedicated NIC gives remote out-of-band management access

Specifikationer

Inga publicerade specifikationer för den här produkten än.

Frågor om den här produkten

What additional components are required before the Xeon E-2314 processor and 64 GB DDR4 memory can operate?

The server ships with the CPU, memory modules and four 4 TB SATA hard drives packaged separately; they must be installed in the chassis before first power-on.

Will the four 4 TB SATA III drives work with an existing Smart Array controller that only supports SATA II speeds?

Each drive runs at SATA III 6 Gb/s but will negotiate down to SATA II 3 Gb/s when connected to an older controller, so existing RAID volumes remain accessible.

How can I verify that the iLO dedicated network port is active after assembling the system?

Connect a cable to the iLO port, power the server on and watch for the port LED to blink; then browse to the displayed IP address to confirm the remote management interface loads.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.