Hynix
Hynix HMA84GR7AFR4N-VK 32GB DDR4-2666 ECC REG DIMM desktop RAM
32 GB DDR4-2666 ECC registered DIMM with CL19 latency for servers and workstations
- Capacity32GB
- ECCECC
- 32 GB capacity handles large workloads
- DDR4-2666 speed delivers 21300 MB/s bandwidth
- ECC with registered signal processing protects data integrity
- CL19 latency at 1.20 V balances responsiveness and efficiency
- 288-pin DIMM fits standard server and workstation slots
Hynix 32GB DDR4-2666 ECC Registered DIMM
This single-module kit delivers 32GB of DDR4 memory at 2666MHz with CL19 latency. It uses registered signal processing and on-board ECC for data integrity. The 1.20V operating voltage keeps power draw modest. It targets workstations and servers that require validated error correction.
Sustained-load behaviour with registered ECC
Registered buffering reduces electrical load on the memory controller during continuous operation. ECC detects and corrects single-bit errors without halting the system. The DDR4-2666/PC4-21300 rating ensures consistent throughput across long compute sessions. Stability is prioritised over low-latency bursts.
288-pin DIMM build and daily handling
The module follows the standard 288-pin DIMM form factor measuring 5.3" by 1.2" with a 4" thickness. RoHS certification confirms restricted-substance compliance. One 32GB stick occupies a single slot, leaving room for future expansion. Weight is approximately 1.60oz for easy installation.
I korthet
- 32 GB capacity handles large workloads
- DDR4-2666 speed delivers 21300 MB/s bandwidth
- ECC with registered signal processing protects data integrity
- CL19 latency at 1.20 V balances responsiveness and efficiency
- 288-pin DIMM fits standard server and workstation slots
Specifikationer
| Capacity | 32GB |
|---|---|
| ECC | ECC |
Frågor om den här produkten
How much heat and power does the 1.20 V DDR4-2666 module draw when running continuously?
The module operates at 1.20 V and is rated for DDR4-2666 speed; registered ECC DIMMs of this voltage typically draw a few watts per stick under sustained load.
What motherboard slot and platform support is required for this 288-pin registered ECC DIMM?
It needs a DDR4 288-pin DIMM slot on a workstation or server platform that supports registered memory and ECC functionality.
Will this CL19 registered stick work alongside older unbuffered DDR4 modules I already have?
Registered and unbuffered DIMMs cannot be mixed on the same motherboard; the system requires all slots to use registered modules.
Även i den här avdelningen
Andra har jämfört dessa
Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.



