IBM
IBM 90Y8572 2TB 7200 RPM SAS 3.5" internal hard drive
2TB 3.5-inch SAS hard drive spinning at 7200 RPM with 6Gb/s interface for server storage
- PackagingBare Drive
- InterfaceSerial Attached SCSI (SAS)
- Capacity2TB
- RPM7200 RPM
- Average Latency6Gb/s
- UsageIdeal for Servers
- 2TB capacity stores large server datasets
- 7200 RPM spindle speed enables fast sequential throughput
- SAS 6Gb/s interface provides reliable enterprise connectivity
- 5-inch form factor fits standard server drive bays
- New condition ensures full manufacturer-rated reliability
2TB 7200 RPM SAS drive
This 3.5 inch internal hard drive uses a Serial Attached SCSI interface and spins at 7200 RPM. It offers 2TB of capacity and a 6Gb/s average latency. The unit is supplied as a bare drive in new condition.
Server storage upgrade
The drive suits server builds that need a 6Gbps SAS connection and a 3.5 inch form factor. It is not for systems that only provide SATA ports. It is not for laptops or small-form-factor devices that require 2.5 inch bays.
6Gbps SAS interface
Compatibility depends on a controller or backplane that supports Serial Attached SCSI at 6Gb/s. The drive will not operate on a SATA-only host. Verify the system accepts 3.5 inch SAS devices before purchase.
I korthet
- 2TB capacity stores large server datasets
- 7200 RPM spindle speed enables fast sequential throughput
- SAS 6Gb/s interface provides reliable enterprise connectivity
- 5-inch form factor fits standard server drive bays
- New condition ensures full manufacturer-rated reliability
Specifikationer
| Brand | IBM |
|---|---|
| Model | 90Y8572 |
| Packaging | Bare Drive |
| Interface | Serial Attached SCSI (SAS) |
| Capacity | 2TB |
| RPM | 7200 RPM |
| Average Latency | 6Gb/s |
| Usage | Ideal for Servers |
| Form Factor | 3.5" |
| Fraktvikt | 1.07 kg |
| Paketstorlek | 260 × 200 × 100 mm |
Frågor om den här produkten
Will the 90Y8572 2TB SAS drive work in my older server that only has 3Gb/s SAS backplanes?
The drive runs at 6Gb/s SAS and will negotiate down to 3Gb/s on an older backplane, so it will function but at the slower link speed.
How can I confirm the 90Y8572 is running at its full 7200 RPM and 6Gb/s link after installation?
Check the controller BIOS or RAID utility — it should report the drive model 90Y8572, 2TB capacity, 7200 RPM and a negotiated 6Gb/s SAS link rate.
The 90Y8572 is listed as bare drive — does it ship with a hot-swap tray or mounting screws for a 3.5" bay?
No, the bare-drive packaging includes only the drive itself; a compatible 3.5" hot-swap tray and any mounting screws must be purchased separately.
Även i den här avdelningen
Andra har jämfört dessa
Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.
