Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
IBM 146GB 15000RPM SAS 2.5-inch internal hard drive, silver metal casing

IBM

IBM TF3D416G3200HC16FDC01 146GB 15000RPM SAS 2.5 internal hard drive

SKU CH-45XA-D3NYT MPN TF3D416G3200HC16FDC01

A 146 GB 15,000 RPM SAS internal hard drive in a 2.5-inch hot-swap form factor with 16 MB buffer and 600 MB/s transfer rate

  • 146 GB capacity stores critical enterprise datasets
  • 15 000 RPM spindle speed delivers rapid data access
  • SAS interface supports 600 MB/s external transfer rate
  • 5 inch hot-swap form factor enables tool-less drive replacement
  • 9 ms average seek time reduces latency for transaction workloads

146 GB 15 000 RPM SAS drive

The IBM TF3D416G3200HC16FDC01 is a 146 GB internal hard drive with a 15 000 RPM spindle speed and a SAS-2 interface. It uses a 2.5 inch form factor and supports hot-swap operation. A 16 MB buffer and 600 MB/s external transfer rate complete the specification.

Enterprise arrays and blade servers

This drive suits environments that need high spindle speed and hot-swap capability in a small form factor. Buyers who want more storage capacity or a different interface should look at other options.

Sustained workload behaviour

Under sustained load the 15 000 RPM spindle keeps average latency at 2 ms and seek time at 2.9 ms. The 600 MB/s interface bandwidth and 16 MB buffer help maintain consistent throughput during extended operations.

I korthet

  • 146 GB capacity stores critical enterprise datasets
  • 15 000 RPM spindle speed delivers rapid data access
  • SAS interface supports 600 MB/s external transfer rate
  • 5 inch hot-swap form factor enables tool-less drive replacement
  • 9 ms average seek time reduces latency for transaction workloads

Specifikationer

Inga publicerade specifikationer för den här produkten än.

Frågor om den här produkten

Does this 2.5 inch SAS-2 drive require a 2.5 inch SAS hot-swap bay or can it use a 3.5 inch adapter?

The drive uses a 2.5 inch form factor and supports hot-swap; it must be installed in a compatible 2.5 inch SAS hot-swap bay or a 2.5-to-3.5 inch adapter that passes the SAS signal.

Will this 15 000 RPM SAS-2 drive negotiate down to 3 Gbps when connected to an older SAS-1 controller?

The drive runs on a SAS-2 interface rated at 600 MB/s; SAS-2 devices typically negotiate link speed with the controller, so an older SAS-1 controller would limit the link to its maximum rate.

How can I confirm the 146 GB drive is operating at its rated 15 000 RPM after installation?

Use the server's RAID or HBA management utility to verify the reported spindle speed shows 15 000 RPM and that the drive identifies as the correct part number.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.