Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Green rectangular development board with silver camera module and black antenna trace

KEHIPI

KEHIPI ESP32-S3 CAM Board 240 MHz 8 MB Flash 8 MB PSRAM

SKU CH-CSRM-Q80TB

Dual-core ESP32-S3 camera board with 240 MHz clock, 8 MB flash, 8 MB PSRAM, onboard Wi-Fi and Bluetooth 5, plus bundled MicroPython and C tutorials with example projects

  • Dual-core 240 MHz processor handles real-time camera tasks
  • 8 MB flash and 8 MB PSRAM store firmware and frame buffers
  • Onboard 2.4 GHz Wi-Fi and Bluetooth 5 enable wireless streaming
  • MicroPython and C examples cover LED, serial, Wi-Fi, Bluetooth and camera projects
  • Included 1 GB memory card adds removable storage for images and logs

ESP32-S3 Dual-Core 240 MHz Board

The KEHIPI ESP32-S3 CAM board integrates a dual-core 32-bit processor running up to 240 MHz with 8 MB flash and 8 MB PSRAM. It includes an onboard camera, 2.4 GHz Wi-Fi and Bluetooth 5 (LE). The kit supplies a 1 GB memory card and downloadable MicroPython and C tutorials with example projects for learners and embedded developers.

Low-Power Wireless Operation

The module draws minimal current during typical Wi-Fi or camera tasks and runs from a single USB connection. Onboard radios use Bluetooth 5 LE for efficient short-range links. No active cooling is required and the board stays silent in normal use.

USB Programming and Project Expansion

Connect the board to a computer via USB to flash MicroPython or C code using the supplied tutorials. The onboard camera and memory-card slot enable image capture and local storage without extra shields. Builders needing additional GPIO breakout headers or higher-resolution sensors must add external hardware.

I korthet

  • Dual-core 240 MHz processor handles real-time camera tasks
  • 8 MB flash and 8 MB PSRAM store firmware and frame buffers
  • Onboard 2.4 GHz Wi-Fi and Bluetooth 5 enable wireless streaming
  • MicroPython and C examples cover LED, serial, Wi-Fi, Bluetooth and camera projects
  • Included 1 GB memory card adds removable storage for images and logs

Specifikationer

BrandFREENOVE
ModelFNK0085
Part NumberFNK0085

Frågor om den här produkten

How do I install the board and which step is often missed?

Connect the board to your computer with a USB cable after installing the IDE and driver; the step often missed is installing the driver before plugging in the board.

What maintenance or replacement will the included 1 GB memory card need later?

The 1 GB memory card may wear out after many write cycles and should be replaced with another microSD card when errors appear.

What limit appears first during sustained camera streaming?

The 8 MB PSRAM limits frame buffer size, so sustained high-resolution streaming hits memory capacity before the 240 MHz dual-core processor saturates.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.