Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Small black ATX power supply unit 16W

KHACHIMO

KHACHIMO IHTAA-16W 16W ATX power supply

SKU CH-FNBT-7WMGC

Compact 16W ATX power supply tested working for reliable low-power system builds

  • TypeATX
  • ATX form factor fits standard cases
  • 16 W output for low-power builds
  • Tested working before shipment
  • Good quality components for reliability
  • First listed by manufacturer March 12, 2024

Low-wattage ATX power supply

The KHACHIMO IHTAA-16W is a 16W ATX power supply intended for systems with extremely low power demands. It provides a basic ATX form factor connection for compatible motherboards and peripherals. The unit is supplied new and has been tested working by the manufacturer.

Suitable for ultra-low-power builds

This supply fits embedded PCs, thin clients or specialised industrial boards that draw minimal current from the ATX connector. It is not for standard desktop motherboards, discrete graphics cards or any configuration where total system draw can exceed the rated output. Builders needing headroom for additional drives or expansion cards should look elsewhere.

16W rated output

The single deciding specification is the 16W maximum power rating. If the complete system — including CPU, memory, storage and all onboard devices — stays within this limit, the unit will deliver the required ATX voltages. If the projected load is higher, a higher-wattage ATX supply must be chosen.

I korthet

  • ATX form factor fits standard cases
  • 16 W output for low-power builds
  • Tested working before shipment
  • Good quality components for reliability
  • First listed by manufacturer March 12, 2024

Specifikationer

TypeATX

Frågor om den här produkten

What ATX form factor does the IHTAA-16W use for case mounting?

The IHTAA-16W follows the standard ATX form factor, so it fits any chassis with an ATX power-supply cut-out and four rear mounting holes.

Which power connectors must be seated during installation to avoid a no-post condition?

Connect the 24-pin ATX main connector and the 4-pin or 8-pin CPU power connector firmly until each latch clicks; missing either will prevent the system from starting.

When should the internal fan be cleaned to maintain airflow in the IHTAA-16W?

Use compressed air to clear dust from the fan intake and exhaust every six to twelve months, or sooner in dusty environments, to keep cooling efficient.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.