Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Four black DDR5 RDIMM sticks with silver heat spreaders and Kingston branding

Kingston Technology Corp.

Kingston Technology Corp. KF564R32RBEK4-64 Fury Renegade Pro 64GB (4×16GB) DDR5-6400 CL32 RDIMM server RAM

SKU CH-0H7H-SP191 MPN KF564R32RBEK4-64

Four 16 GB DDR5-6400 CL32 registered ECC RDIMMs with Intel XMP 3.0 and AMD EXPO profiles for workstation and server platforms

  • Capacity64GB (4 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL32
  • Timing32-39-39
  • Voltage1.40V
  • 64 GB total capacity across four 16 GB modules for heavy workloads
  • DDR5-6400 speed with CL32 latency delivers fast data throughput
  • Registered ECC design corrects multi-bit errors to protect data integrity
  • Intel XMP 3.0 and AMD EXPO profiles enable one-click overclocking
  • Low-profile heat spreader maintains thermal stability under sustained load

Server-grade DDR5 RDIMM for workstations

This kit delivers 64GB of registered ECC DDR5 across four 16GB modules running at 6400 MT/s with CL32 timings. It targets creators, engineers and data-science professionals who need workstation stability with enthusiast-level speed on platforms that require registered DIMMs.

Sustained load behaviour with ECC integrity

Registered signal processing and on-die ECC combine with multi-bit error correction to maintain data integrity during prolonged compute workloads. The 1.40V operating voltage supports the 6400 MT/s data rate while the CL32-39-39 timings keep latency predictable under continuous memory pressure.

Quad-channel kit installs in matched slots

Four identical 288-pin modules simplify population of quad-channel motherboards; the kit is validated for Intel XMP 3.0 and AMD EXPO profiles so the rated speed applies automatically when the firmware option is enabled. Builders must verify that their platform accepts registered DDR5 RDIMMs, as unbuffered consumer boards will not post with these modules.

I korthet

  • 64 GB total capacity across four 16 GB modules for heavy workloads
  • DDR5-6400 speed with CL32 latency delivers fast data throughput
  • Registered ECC design corrects multi-bit errors to protect data integrity
  • Intel XMP 3.0 and AMD EXPO profiles enable one-click overclocking
  • Low-profile heat spreader maintains thermal stability under sustained load

Specifikationer

BrandKingston
SeriesFury Renegade Pro
ModelKF564R32RBEK4-64
Capacity64GB (4 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL32
Timing32-39-39
Voltage1.40V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
Multi-channel KitQuad Channel Kit
BIOS/Performance ProfileIntel XMP 3.0 and AMD EXPO
Heat SpreaderYes
FeaturesKingston FURY KF564R32RBK4-64 is a kit of four 2G x 80-bit (16GB) DDR5-6400 CL32 SDRAM (Synchronous DRAM) 1Rx8, ECC memory module, based on ten 2G x 8-bit FBGA components per module. The module supports Intel® Extreme Memory Profiles (Intel® XMP) 3.0. Total kit capacity is 64GB. Each module has been tested to run at DDR5-6400 at a low latency timing of 32-39-39 at 1.4V. The SPDs are programmed to JEDEC standard latency DDR5-4800 timing of 40-39-39 at 1.1V.
Fraktvikt0.09 kg
Paketstorlek165 × 102 × 51 mm

Frågor om den här produkten

How much power does the 1.40 V kit draw when running at 6400 MHz all day?

Each module is rated at 1.40 V for DDR5-6400 operation; total system power depends on the platform's memory controller and load, so consult your motherboard or CPU documentation for exact figures.

What motherboard feature must be present to run this quad-channel 288-pin RDIMM kit at its rated speed?

The board must provide four DDR5 RDIMM slots wired for quad-channel operation and support Intel XMP 3.0 or AMD EXPO profiles to apply the 6400 MHz, CL32, 1.40 V settings automatically.

Can the registered ECC design work alongside older non-ECC DDR5 modules in the same system?

No, registered ECC RDIMMs and unbuffered non-ECC DDR5 modules use different signalling and cannot be mixed on the same memory controller.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.