Kingston Technology Corp.
Kingston Technology Corp. KVR400D2S8R3/1G 1GB DDR2 400 server RAM
1GB DDR2 400 ECC registered server memory module with CL3 latency and 1.80V operation
- Capacity1GB
- Type240-Pin DDR2 SDRAM
- SpeedDDR2 400 (PC2 3200)
- CAS LatencyCL3
- Voltage1.80V
- ECCYes
- 1GB capacity expands server memory
- DDR2 400 (PC2 3200) speed matches legacy platforms
- ECC Registered design protects data integrity
- CL3 latency at 1.80V for stable operation
- 240-pin single-rank module fits standard DDR2 slots
Product identity
Kingston KVR400D2S8R3/1G is a 1GB DDR2 400 registered ECC module built for server platforms that require 240-pin DDR2 SDRAM at 1.80V. It delivers PC2 3200 bandwidth with CL3 latency and single-rank organisation.
Suitable systems and limits
This module fits servers needing registered ECC DDR2 400 memory and cannot be used in desktops or workstations that accept only unbuffered non-ECC DIMMs. Systems requiring higher capacity per slot, faster DDR2 speeds, or a different DDR generation are not supported.
Deciding specification
The registered ECC design combined with DDR2 400 speed and 240-pin form factor is the single attribute that determines whether this part will function in a given server motherboard.
I korthet
- 1GB capacity expands server memory
- DDR2 400 (PC2 3200) speed matches legacy platforms
- ECC Registered design protects data integrity
- CL3 latency at 1.80V for stable operation
- 240-pin single-rank module fits standard DDR2 slots
Specifikationer
| Brand | Kingston |
|---|---|
| Model | KVR400D2S8R3/1G |
| Capacity | 1GB |
| Type | 240-Pin DDR2 SDRAM |
| Speed | DDR2 400 (PC2 3200) |
| CAS Latency | CL3 |
| Voltage | 1.80V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Heat Spreader | No |
| Features | Single Rank |
| Fraktvikt | 0.09 kg |
| Paketstorlek | 170 × 56 × 15 mm |
Frågor om den här produkten
Does my server motherboard need a 240-pin DDR2 slot to install this 1GB module?
Yes, this is a 240-pin DDR2 SDRAM DIMM, so the board must provide a matching DDR2 socket.
Can I mix this CL3 registered ECC stick with older unbuffered DDR2 modules I already have?
No, registered ECC modules require a chipset that supports registered memory and cannot be mixed with unbuffered DIMMs.
After installation, how can I confirm the module is running at DDR2 400 with CL3 timings?
Check the BIOS memory information or a system utility such as CPU-Z; it should report PC2-3200 speed and CAS latency 3.
Även i den här avdelningen
Andra har jämfört dessa
Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.



