Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Black PCIe 5.0 M.2 to U.2 adapter cable, 50cm, straight male-to-male connectors, bottom side exit, 15-pin power

LetLinkSo

LetLinkSo LLS-CB-1MT1UT-01 PCIe 5.0 M.2 to U.2 Adapter 50cm

SKU CH-FPES-GF51F

Connects a U.2 NVMe SSD to an M.2 2280 M-key slot with PCIe 5.0 speeds up to 128 Gbps, includes 15-pin SATA power and a 50cm cable

  • ColorBlack
  • Cable Length1.6ft (50cm)
  • SpecificationsBottom Side Exit
  • Connector AM.2 M key 2280
  • Connector BSFF-8639(U.2)
  • Terminal GenderMale to Male

Cable Exit Direction Bottom Side Exit

  • Connect U.2 NVMe SSDs via an M.2 2280 M key slot
  • PCIe 5.0 support delivers up to 128 Gbps theoretical bandwidth
  • Works with PCIe 4.0, 3.0, 2.0 and 1.0 drives for flexible upgrades
  • Plug-and-play design needs no drivers or software to operate
  • Requires a SATA power cable connection to function

Adapter purpose and audience

The LetLinkSo LLS-CB-1MT1UT-01 connects a U.2 NVMe SSD to a motherboard M.2 2280 M-key slot. It suits desktop or server builders who need to add an enterprise-style drive without a dedicated U.2 port. It is not for users whose board lacks an M.2 M-key connector or who cannot supply SATA power.

Critical specification

The adapter runs at PCIe 5.0 x4 with a theoretical 128 Gbps ceiling and is backward compatible with PCIe 4.0, 3.0, 2.0 and 1.0 drives. A 15-pin SATA power cable must be attached for the U.2 device to operate.

Installation and common issues

The 50 cm straight cable with bottom-side exit routes cleanly in most chassis. Plug the M.2 end into the motherboard, attach the U.2 drive, then connect SATA power before booting. Forgetting the power lead is the typical reason the drive does not appear.

I korthet

  • Connect U.2 NVMe SSDs via an M.2 2280 M key slot
  • PCIe 5.0 support delivers up to 128 Gbps theoretical bandwidth
  • Works with PCIe 4.0, 3.0, 2.0 and 1.0 drives for flexible upgrades
  • Plug-and-play design needs no drivers or software to operate
  • Requires a SATA power cable connection to function

Specifikationer

BrandLetLinkSo
SeriesM.2 to U.2 Adapter
ModelLLS-CB-1MT1UT-01
Part NumberLLS-CB-1MT1UT-01
ColorBlack
Cable Length1.6ft (50cm)
SpecificationsBottom Side Exit
Connector AM.2 M key 2280
Connector BSFF-8639(U.2)
Terminal GenderMale to Male
Connector StyleStraight
FeaturesENHANCED SYSTEM PERFORMANCE
Weight1.68 ounces
Package Quantity1
Package ContentsPCIe 5.0 M.2 to U.2 Adapter x 1

Andra versioner av den här modellen

3 till i samma serie

Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.

Frågor om den här produkten

What does 128 Gbps mean for my U.2 NVMe SSD in a real system?

It is the theoretical PCIe 5.0 x4 ceiling; actual throughput depends on your motherboard M.2 slot generation and the SSD itself

Which interface standard does the adapter use and what does it limit?

It connects an M.2 M key 2280 slot to an SFF-8639 U.2 drive over PCIe 5.0 x4 lanes, capping at 128 Gbps

What does the adapter need to fit and mount in my case?

A free M.2 2280 M key slot on the motherboard, a 50 cm cable run to the U.2 drive, and a 15-pin SATA power connection for the adapter

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.