Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Small 3.5 inch IPS LCD touchscreen board with DSI ribbon cable, glossy glass front and exposed green PCB back

LORDWORLD

LORDWORLD 3.5 Inch DSI IPS LCD Touchscreen 640×480 development board

SKU CH-WAT6-869B8

A 3.5 inch IPS display with 640×480 resolution and five-point capacitive touch connects directly via DSI for plug-and-play use with Raspberry Pi boards

  • Sharp 640×480 IPS panel for clear visuals
  • Responsive 5-point capacitive touch control
  • Native DSI plug-and-play with Raspberry Pi
  • Seamless Raspberry Pi OS integration
  • Compact build fits portable and robotic projects

Product identity

The LORDWORLD 3.5 inch DSI IPS LCD touchscreen is a compact development board accessory built for Raspberry Pi projects. It targets makers, educators and embedded developers who need a small integrated display and touch interface for portable or space-constrained builds.

Sustained operation

The 640×480 IPS panel maintains consistent colour accuracy and viewing angles during extended use in dashboards, robotics or kiosk-style interfaces. Capacitive 5-point touch remains responsive for continuous UI interaction without the drift sometimes seen on resistive alternatives. The direct DSI link avoids the bandwidth limits and signal degradation that can appear on GPIO-driven screens over long runs.

Installation reality

Plug-and-play DSI connection works immediately with Raspberry Pi OS; no driver compilation or configuration files are required. The module seats directly on the Pi’s DSI header, so clearance inside tight 3D-printed enclosures must be verified before final assembly. Touch calibration is handled by the OS, but users running minimal or custom distributions may need to enable the appropriate device-tree overlay manually.

I korthet

  • Sharp 640×480 IPS panel for clear visuals
  • Responsive 5-point capacitive touch control
  • Native DSI plug-and-play with Raspberry Pi
  • Seamless Raspberry Pi OS integration
  • Compact build fits portable and robotic projects

Specifikationer

BrandLORDWORLD

Frågor om den här produkten

Does the 3.5 inch IPS panel draw enough current to need a separate power supply when the Raspberry Pi runs all day?

The display connects through the Pi's DSI port and is powered directly from the board, so no extra power supply is required for continuous operation.

Which Raspberry Pi models already have the DSI connector this screen needs to work?

Any Raspberry Pi board with a standard DSI display port — including Pi 3, Pi 4 and Pi 5 — can drive the 640×480 panel without adapters.

Will the capacitive touch layer still register input if I keep using an older Raspberry Pi 3 Model B?

Yes, the 5-point capacitive touch works on any Pi that supports the DSI interface and runs Raspberry Pi OS, including the Pi 3 Model B.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.