Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Horizontal black metal power strip with ten outlets and a long cord

MINUTEMAN

MINUTEMAN OES1015HV PDU 12A 10 Outlets 15ft Cord 1U/0U

SKU CH-NFJV-5FA6K MPN OES1015HV

A 12-amp surge-protected PDU with ten NEMA 5-15/20R outlets, a 15-foot cord and 1U or 0U mounting options

  • TypeBasic
  • Rack Size1U
  • StyleHorizontal Installation, 0U Vertical Installation
  • Certifications62368-1 Certification
  • Maximum Input Current15A
  • Input Connector(s)NEMA 5-15P

Model OES1015HV

Visa 8 fler konfigurationer

Genomstrukna varianter finns, men är inte i lager här.

  • Surge protection built in for equipment safety
  • 12 A capacity with 15 ft cord for flexible placement
  • Ten NEMA 5-15/20R outlets across front and rear
  • Horizontal 1U or vertical 0U mounting options included
  • Certified to UL 62368-1 standard for reliable operation

Essential Power Distribution

The MINUTEMAN OES1015HV is a basic power distribution unit built for IT racks and network closets. It delivers 12-amp output capacity through ten NEMA 5-15/20R outlets to servers, switches and peripherals.

Flexible Mounting and Reach

The 1U chassis includes brackets for horizontal rack mounting or 0U vertical installation along a cabinet rail. A 15-foot input cord with a NEMA 5-15P plug gives generous reach to distant wall receptacles or UPS systems. Two front and eight rear outlets keep cable routing tidy in either orientation. An input circuit breaker provides overload protection for connected equipment.

Surge-Protected 12-Amp Capacity

This unit adds surge protection to standard power distribution, helping shield sensitive hardware from transient voltage spikes. The 12-amp maximum output current is the key figure that determines how many devices you can safely connect. Buyers who need higher amperage or metered monitoring should look at other models.

I korthet

  • Surge protection built in for equipment safety
  • 12 A capacity with 15 ft cord for flexible placement
  • Ten NEMA 5-15/20R outlets across front and rear
  • Horizontal 1U or vertical 0U mounting options included
  • Certified to UL 62368-1 standard for reliable operation

Specifikationer

BrandMINUTEMAN
SeriesOE Series
ModelOES1015HV
TypeBasic
Rack Size1U
StyleHorizontal Installation, 0U Vertical Installation
Certifications62368-1 Certification
Maximum Input Current15A
Input Connector(s)NEMA 5-15P
Cord Length15 ft
Output Connector(s)Front Panel Receptacles: (2) 5-15/20R
Rear Panel Receptacles: (8) 5-15/20R
Maximum Output Current12A
Overload ProtectionInput Circuit Breaker Protection
FeaturesLonger power cords
Most Minuteman PDU units have up to 15-ft power cords, to allow for seamless installations
More standard outlets
Minuteman PDU units have 6, 8, 10, 14, 18, or 24 outlets. Most of the Minuteman PDUs have additional front outlets for improved access
Configuration versatility
Minuteman PDU units have a multi-form factor with 1U and 0U configurations allowing for either horizontal or vertical placement. 1U products ship with a stand-off mounting bracket, at no additional cost, that allows for vertical installation on most racks and enclosures
Locking (L) and Hardwire (
Fraktvikt2.56 kg
Paketstorlek521 × 203 × 64 mm

Andra versioner av den här modellen

5 till i samma serie

Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.

Frågor om den här produkten

What input connector does the OES1015HV use and what current limit does it impose?

It uses a NEMA 5-15P plug rated for 15 A input, while the unit itself delivers a maximum of 12 A to the outlets.

What mounting hardware is included for the 1U horizontal or 0U vertical orientations?

Rack-mount ears for 1U horizontal installation and 0U brackets for vertical mounting are both supplied with the unit.

How is the PDU installed and which step is commonly missed?

Mount the included brackets for either 1U horizontal or 0U vertical orientation, plug the 15 ft cord into a 15 A branch circuit, then reset the input circuit breaker before connecting equipment.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.