NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.
MSI
A refurbished graphics card with 8GB GDDR6 memory, 2176 CUDA cores and a 1650 MHz boost clock for 1440p gaming and VR
This refurbished graphics card uses the NVIDIA GeForce RTX 2060 SUPER GPU with 2176 CUDA cores and a 1650 MHz boost clock. It connects through a PCI Express 3.0 x16 slot and draws up to 175 W from a single 8-pin power connector. The Twin Frozr 7 cooler uses two TORX Fan 3.0 fans and Zero Frozr technology to stop the fans at low load.
The 8 GB GDDR6 frame buffer on a 256-bit bus at 14 Gbps handles current 1440p titles and meets the Virtual Reality Ready designation. Four simultaneous displays are supported via one HDMI 2.0b and three DisplayPort 1.4 outputs. SLI is not supported, so buyers wanting multi-GPU scaling should consider a different model.
The 8 GB memory capacity combined with the 256-bit interface and 14 Gbps effective clock provides the bandwidth needed for higher texture settings at 1440p. Systems with a 550 W power supply and a free 8-pin connector meet the stated requirements. If your target resolution stays at 1080p, a card with less memory may suffice.
| Brand | MSI |
|---|---|
| Model | G206SG |
| Interface | PCI Express 3.0 x16 |
| Chipset Manufacturer | NVIDIA |
| GPU | GeForce RTX 2060 SUPER |
| Boost Clock | 1650 MHz |
| CUDA Cores | 2176 |
| Effective Memory Clock | 14 Gbps |
| Memory Size | 8GB |
| Memory Interface | 256-Bit |
| Memory Type | GDDR6 |
| DirectX | DirectX 12 |
| OpenGL | OpenGL 4.5 |
| Multi-Monitor Support | 4 |
| HDMI | 1 x HDMI 2.0b |
| DisplayPort | 3 x DisplayPort 1.4 |
| Max Resolution | 7680 x 4320 |
| SLI Support | No |
| Virtual Reality Ready | Yes |
| Cooler | Double Fans |
| Thermal Design Power | 175W |
| System Requirements | Recommended PSU: 550W |
| Recommended PSU Wattage | 550W |
| Power Connector | 8-Pin |
| HDCP Ready | 2.2 |
| Features | Twin Frozr 7 Thermal Design TORX Fan 3.0 - Dispersion fan blade: Steep curved blade accelerating the airflow. - Traditional fan blade: Provides steady airflow to massive heat sink below. Mastery of Aerodynamics: The heatsink is optimized for efficient heat dissipation, keeping your temperatures low and performance high. Zero Frozr technology: Stopping the fan in low-load situations, keeping a noise-free environment. Dragon Center A consolidated platform that offers all software including MYSTIC LIGHT functionality for your MSI Gaming product. |
| Max GPU Length | 248 mm |
| Card Dimensions (L x H) | 9.76" x 5.04" |
| Fraktvikt | 1.36 kg |
| Paketstorlek | 305 × 229 × 76 mm |
Yes, the card uses a PCI Express 3.0 x16 interface and requires one 8-Pin power connector from a 550W PSU.
Connecting the 8-Pin power cable to the card after seating it in the PCI Express 3.0 x16 slot.
Replace paste if temperatures rise under load after several years; the Zero Frozr fans stop at idle to reduce wear.
Även i den här avdelningen
Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.
Det du betalar med, och det du ser priserna i.
Skickas från din plånbok i kassan
Endast visning — katalogen är prissatt i US-dollar
Ingen valuta matchar.
Välj det språk du vill att webbplatsen ska visas på.
Ny här?
Har du redan ett konto?
Det finns ingen automatisk återställning: den här butiken skickar inga e-postmeddelanden, så det finns ingen engångslänk att begära. Lämna adressen kopplad till kontot, så hanteras den för hand.
Förfrågan noterad
Inget är på väg till din inkorg — den här butiken skickar aldrig e-post. Någon tar hand om detta manuellt.
Kom du på det?