BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 US$
0.00277887BTC
I lager
NEMIX RAM
NEMIX RAM 128GB (2x64GB) DDR5 6400MHz CL52 4Rx4 1.1V 288-PIN ECC RDIMM memory upgrade
A 128 GB DDR5 registered ECC kit with two 64 GB modules running at 6400 MHz CL52 for Supermicro X14SBI-TF servers
- Capacity128GB (2 x 64GB)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- Compatible SystemSupermicro
- 128 GB kit doubles memory capacity for data-intensive workloads
- DDR5 6400 MHz CL52 bandwidth accelerates server throughput
- ECC RDIMM 4Rx4 registered design protects data integrity under load
- 10 V operation lowers energy consumption in dense configurations
- Supermicro X14SBI-TF validated compatibility ensures stable deployment
128GB DDR5 6400MHz ECC RDIMM Kit
This 128GB kit contains two 64GB DDR5 6400MHz CL52 modules built for registered ECC server platforms. The 4Rx4 organisation and 1.1V operation match the Supermicro X14SBI-TF memory specification.
Suited for Supermicro X14SBI-TF upgrades
Administrators expanding a Supermicro X14SBI-TF system gain 128GB of registered ECC capacity in two slots. Builders targeting consumer motherboards, non-ECC workstations or platforms that require unbuffered DIMMs should select a different kit.
4Rx4 registered ECC at 6400MHz
The 4Rx4 registered ECC design at DDR5 6400MHz CL52 determines whether the motherboard memory controller can initialise the modules. Verify the platform qualification list before purchase.
I korthet
- 128 GB kit doubles memory capacity for data-intensive workloads
- DDR5 6400 MHz CL52 bandwidth accelerates server throughput
- ECC RDIMM 4Rx4 registered design protects data integrity under load
- 10 V operation lowers energy consumption in dense configurations
- Supermicro X14SBI-TF validated compatibility ensures stable deployment
Specifikationer
| Brand | NEMIX RAM |
|---|---|
| Series | Supermicro Compatible Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server RAM |
| Part Number | MR51200-944K2 |
| Capacity | 128GB (2 x 64GB) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Supermicro |
| CAS Latency | CL52 |
| Heat Spreader | No |
| Type | 288-PIN DDR5 RDIMM |
| Rank | 4Rx4 |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 128GB (2 x 64GB) DDR5 6400MHz PC5-51200 4Rx4 1.1V 288-PIN ECC RDIMM KIT |
Frågor om den här produkten
How do I install these 288-pin DDR5 RDIMMs in my Supermicro X14SBI-TF, and what step is often missed?
Power down the server, open the chassis, align each module's notch with the slot key, press firmly until both retention clips click, then verify in BIOS that all 128GB are detected at 6400MHz with ECC active.
What maintenance or replacement will this 4Rx4 registered ECC kit need over time?
No routine maintenance is required; the modules have no heat spreaders and run at 1.1V. If a DIMM fails, replace the faulty 64GB stick — NEMIX RAM offers a lifetime replacement warranty.
What limit appears first when this memory runs sustained workloads on the X14SBI-TF?
The CAS latency of CL52 at 6400MHz sets the timing ceiling; sustained throughput will be bound by that latency before voltage or thermal limits are reached.
Även i den här avdelningen
Andra har jämfört dessa
Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.
