Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Four green 288-pin DDR5 RDIMM modules without heat spreaders

NEMIX RAM

NEMIX RAM 128GB (4 x 32GB) DDR5 5600MHz CL46 ECC Registered RDIMM memory upgrade

SKU CH-628V-9JR0G

A 128GB kit of four 32GB DDR5 5600MHz CL46 ECC registered RDIMMs built for the Supermicro X14SDW-42C-SP9F motherboard

  • Capacity128GB (4 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 128GB 4X32GB

  • 128 GB capacity in a 4 x 32 GB kit for dense server workloads
  • DDR5 5600 MHz speed rated at PC5-44800 for high bandwidth
  • CL46 CAS latency with 1.1 V operation matching controller expectations
  • Registered ECC RDIMM design offloads the controller and corrects single-bit errors
  • Verified fit for Supermicro X14SDW-42C-SP9F motherboard with 288-pin form factor

Exact DDR5-5600 RDIMM kit

This 128 GB kit contains four 32 GB DDR5-5600 registered ECC modules built to the PC5-44800 standard. It targets administrators upgrading a Supermicro X14SDW-42C-SP9F motherboard that requires 288-pin RDIMM memory.

CL46 2Rx8 registered ECC spec

The modules run at 1.10 V with CL46 latency and a 2Rx8 organisation, matching the exact rank, voltage and timing the board's memory controller expects for full-speed operation.

Four-slot population on supported boards

Registered architecture lets the memory controller drive every populated slot at rated capacity while ECC corrects single-bit errors on the fly. Verify the motherboard manual for approved population order and maximum supported capacity before installation.

I korthet

  • 128 GB capacity in a 4 x 32 GB kit for dense server workloads
  • DDR5 5600 MHz speed rated at PC5-44800 for high bandwidth
  • CL46 CAS latency with 1.1 V operation matching controller expectations
  • Registered ECC RDIMM design offloads the controller and corrects single-bit errors
  • Verified fit for Supermicro X14SDW-42C-SP9F motherboard with 288-pin form factor

Specifikationer

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-328K4
Capacity128GB (4 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content128GB 4X32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Andra versioner av den här modellen

5 till i samma serie

Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.

Frågor om den här produkten

What does DDR5 5600 CL46 mean for real-world server throughput?

The kit runs at 5600 MT/s with CAS latency 46, giving the memory controller the exact timing it expects so all four slots operate at rated speed without downclocking.

How does the PC5-44800 rating limit bandwidth on this motherboard?

PC5-44800 specifies the peak transfer rate of the DDR5 5600 modules; the Supermicro X14SDW-42C-SP9F memory controller caps usable bandwidth at that level.

Will these 288-pin RDIMMs physically seat in the Supermicro X14SDW-42C-SP9F?

Yes, the 288-pin registered DIMM form factor matches the board's DDR5 RDIMM slots exactly; no heat spreader means standard clearance.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.