Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Two green DDR4 SODIMM modules with black chips and gold contacts

NEMIX RAM

NEMIX RAM 16GB (2x8GB) DDR4 2133 CL15 SODIMM kit for POSIFLEX RT-5015E

SKU CH-MH0Z-MWQHW

16 GB DDR4 2133 CL15 SODIMM kit validated for the POSIFLEX RT-5015E terminal

  • Capacity16GB (2 x 8GB)
  • SpeedDDR4 2133 (PC4 17000)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16 GB kit boosts terminal responsiveness with two 8 GB modules
  • DDR4 2133 speed matches POSIFLEX RT-5015E specifications
  • CL15 latency supports smooth point-of-sale operation
  • 2 V low voltage reduces power draw in always-on kiosks
  • 260-pin SODIMM form factor fits the terminal memory slots

POSIFLEX RT-5015E DDR4 SODIMM kit

This NEMIX RAM kit delivers 16 GB of DDR4 2133 memory in two 8 GB SODIMM modules built for the POSIFLEX RT-5015E terminal. Each stick runs at 1.20 V with CL15 latency and uses a 2Rx8 260-pin layout. The unbuffered non-ECC design matches the platform's standard memory specification.

Verify slot count and current configuration

The RT-5015E must accept two 260-pin DDR4 SODIMM modules and support 2133 MT/s operation at 1.20 V. Confirm the system board has two free slots or that you are replacing an existing pair. The modules are unbuffered and non-ECC, so the platform must not require registered or ECC memory.

Ideal for POS terminal memory refresh

This kit suits technicians upgrading a POSIFLEX RT-5015E to its full 16 GB capacity with matched modules. It is not for buyers who need ECC error correction, registered DIMMs, a different pin count, higher speeds than 2133 MT/s, or memory for any other laptop or desktop platform.

I korthet

  • 16 GB kit boosts terminal responsiveness with two 8 GB modules
  • DDR4 2133 speed matches POSIFLEX RT-5015E specifications
  • CL15 latency supports smooth point-of-sale operation
  • 2 V low voltage reduces power draw in always-on kiosks
  • 260-pin SODIMM form factor fits the terminal memory slots

Specifikationer

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 2133MHZ Non-ECC Unbuffered SODIMM
Part NumberMS17000-828K2
Capacity16GB (2 x 8GB)
SpeedDDR4 2133 (PC4 17000)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL15
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB (2X8GB) DDR4 2133MHZ PC4-17000 2Rx8 1.2V CL15 260-PIN Non-ECC Unbuffered SODIMM KIT

Frågor om den här produkten

Does the kit include both SODIMM modules or must I purchase a second stick separately?

The package contains two 8 GB DDR4 2133 CL15 260-pin SODIMM modules for a total of 16 GB.

Should I choose the 2Rx8 16 GB kit or a single 8 GB module for the POSIFLEX RT-5015E?

The 2Rx8 16 GB kit fills both slots with matched modules, enabling dual-channel operation at 2133 MT/s.

What does the PC4-17000 rating mean once the memory is installed in the terminal?

PC4-17000 indicates a peak transfer rate of 17 000 MB/s at DDR4 2133 with CL15 latency and 1.20 V operation.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.