Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Green circuit board SODIMM with black memory chips and gold contacts

NEMIX RAM

NEMIX RAM 16GB DDR4 2133 PC4-17000 CL15 2Rx8 1.2V 260-Pin SODIMM POSIFLEX XT-6015C JIVA memory upgrade

SKU CH-383F-2ZFRW

16 GB DDR4 SODIMM running at 2133 MHz with CL15 latency for POSIFLEX XT-6015C JIVA terminals

  • Capacity16GB
  • SpeedDDR4 2133 (PC4 17000)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16 GB capacity expands POS terminal multitasking headroom
  • DDR4 2133 MHz speed matches POSIFLEX XT-6015C JIVA memory bus
  • CL15 CAS latency keeps response times tight
  • 2 V operation reduces power draw in fanless chassis
  • 260-pin SODIMM form factor fits the terminal slot directly

Targeted POS terminal upgrade

This 16 GB DDR4 2133 SODIMM is built for the POSIFLEX XT-6015C JIVA fanless point-of-sale terminal. It delivers a single-module capacity increase for systems that need more memory headroom in retail or hospitality environments.

Check your terminal before ordering

Verify that the unit accepts 260-pin DDR4 SODIMMs running at 1.2 V with CL15 latency. The module is non-ECC and unbuffered, so the motherboard must support that configuration. Confirm the maximum supported capacity per slot in the terminal's documentation.

Replaces lower-capacity DDR4 SODIMMs

Swapping an 8 GB or 4 GB stick for this 16 GB module doubles or quadruples available memory for multi-tasking POS workloads. The upgrade is worthwhile when the terminal runs concurrent applications or larger databases and the board can address the full 16 GB.

I korthet

  • 16 GB capacity expands POS terminal multitasking headroom
  • DDR4 2133 MHz speed matches POSIFLEX XT-6015C JIVA memory bus
  • CL15 CAS latency keeps response times tight
  • 2 V operation reduces power draw in fanless chassis
  • 260-pin SODIMM form factor fits the terminal slot directly

Specifikationer

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 2133MHZ Non-ECC Unbuffered SODIMM
Part NumberMS17000-628K1
Capacity16GB
SpeedDDR4 2133 (PC4 17000)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL15
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB (1X16GB) DDR4 2133MHZ PC4-17000 2Rx8 1.2V CL15 260-PIN Non-ECC Unbuffered SODIMM

Frågor om den här produkten

What comes in the box and do I need extra parts to install the MS17000-628K1 module in my POSIFLEX XT-6015C JIVA?

The package contains one 16GB DDR4 2133 CL15 260-Pin SODIMM; no additional parts are required for installation.

Should I choose the 16GB 2Rx8 version or a different capacity for the POSIFLEX XT-6015C JIVA?

This 16GB 2Rx8 DDR4 2133 module is built for the POSIFLEX XT-6015C JIVA; select the capacity your terminal's motherboard supports.

What does the PC4-17000 rating mean when the module is running inside the POSIFLEX XT-6015C JIVA?

PC4-17000 indicates DDR4 2133 speed with CL15 latency at 1.2V, delivering the rated bandwidth the terminal's memory controller expects.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.