Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Green circuit board with black memory chips, gold edge connector, no heat spreader

NEMIX RAM

NEMIX RAM 16GB DDR4 2666 CL19 2Rx8 1.2V 288-Pin UDIMM memory upgrade

SKU CH-Y62X-R99H8

16 GB DDR4-2666 CL19 2Rx8 UDIMM at 1.2 V for compatible Micron desktops and workstations

  • Capacity16GB
  • SpeedDDR4 2666 (PC4 21300)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16GB capacity for demanding workloads
  • DDR4 2666 speed for responsive performance
  • CL19 latency for efficient data access
  • 2V operation for lower power draw
  • 288-pin UDIMM fits standard desktop slots

Micron-compatible DDR4 module

This 16 GB DDR4 2666 UDIMM is built with Micron chips and tested for Micron-based systems. It runs at 1.2 V with CL19 latency and a 2Rx8 rank layout. The unbuffered, non-ECC design fits standard 288-pin desktop DIMM slots.

Desktop upgraders needing Micron-validated RAM

It suits owners of Micron-qualified desktops or workstations who want a single 16 GB stick without ECC or registered buffering. Builders requiring ECC error correction, registered modules, higher speeds or lower latencies should look elsewhere.

Drops into a 288-pin DDR4 slot

The module needs a motherboard that accepts 2666 MT/s DDR4 UDIMMs at 1.2 V. It leaves other slots free for matching sticks and adds capacity without raising voltage or changing memory topology.

I korthet

  • 16GB capacity for demanding workloads
  • DDR4 2666 speed for responsive performance
  • CL19 latency for efficient data access
  • 2V operation for lower power draw
  • 288-pin UDIMM fits standard desktop slots

Specifikationer

BrandNEMIX RAM
SeriesMicron Server/Workstaion Compatible Series Memory
ModelMICRON DDR4 2666MHZ Non-ECC Unbuffered UDIMM
Part NumberMD21300-628K1
Capacity16GB
SpeedDDR4 2666 (PC4 21300)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemMICRON
CAS LatencyCL19
Heat SpreaderNo
Type288-Pin DDR4 UDIMM
Rank2Rx8
FeaturesDDR4 Non- ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB (1X16GB) DDR4 2666MHZ PC4-21300 2Rx8 1.2V CL19 288-PIN Non-ECC Unbuffered UDIMM

Frågor om den här produkten

Does my motherboard need a free 288-pin DDR4 DIMM slot for this 16 GB module?

Yes, the module is a 288-pin DDR4 UDIMM that installs in a standard desktop DDR4 slot.

Can I keep my existing DDR4 2666 CL19 sticks and add this 2Rx8 16 GB module?

It will run at the speed and timings of the slowest module; matching rank and voltage helps stability.

How do I confirm the 2666 MT/s speed and CL19 latency are active after install?

Check the memory tab in CPU-Z or the BIOS main screen; both should show 2666 MT/s and CL19.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.