Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Green circuit board with black memory chips, gold edge connector, no heat spreader

NEMIX RAM

NEMIX RAM 16GB DDR4 3200 CL22 260-pin SODIMM POSIFLEX EK-1652

SKU CH-CE4K-J252V

16GB DDR4 3200 SODIMM for POSIFLEX EK-1652 kiosk, CL22 1.2V 2Rx8 unbuffered non-ECC

  • Capacity16GB
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16GB capacity boosts POS kiosk responsiveness
  • DDR4 3200MHz speed handles transaction workloads efficiently
  • CL22 latency ensures stable memory timing
  • 2V operation reduces power draw in continuous use
  • 260-pin SODIMM fits POSIFLEX EK-1652 Mercury Series

Purpose-built POS upgrade

This 16 GB DDR4-3200 SODIMM is validated for the POSIFLEX EK-1652 Mercury Series kiosk. It targets system integrators and IT teams who need a single, reliable module to replace or expand memory in that specific platform.

Thermals, noise and power

Operating at 1.20 V without a heat spreader, the unbuffered module draws minimal power and adds no active cooling noise. Standard DDR4 thermals keep it stable inside the compact kiosk chassis during continuous operation.

What the bundle changes

The package contains only the 1x16 GB stick; no extra brackets, cables or software utilities are included. Installation is a direct slot-in procedure, so the upgrade is completed in minutes using existing system tools.

I korthet

  • 16GB capacity boosts POS kiosk responsiveness
  • DDR4 3200MHz speed handles transaction workloads efficiently
  • CL22 latency ensures stable memory timing
  • 2V operation reduces power draw in continuous use
  • 260-pin SODIMM fits POSIFLEX EK-1652 Mercury Series

Specifikationer

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM
Part NumberMS25600-628K1
Capacity16GB
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL22
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB (1X16GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM

Frågor om den här produkten

How do I install the 260-pin SODIMM into the POSIFLEX EK-1652 kiosk?

Power off the kiosk, open the memory compartment, align the module notch with the slot key, insert the SODIMM and press down until the retention clips lock on both sides.

Will this 16GB DDR4 3200 module need any maintenance or replacement during its service life?

The module has no moving parts and no heat spreader; it requires no scheduled maintenance and is covered by a lifetime replacement warranty if a fault ever develops.

What is the first limit reached when the kiosk runs sustained workloads with this CL22 1.20V memory?

The CAS latency of 22 cycles at 3200 MT/s sets the timing ceiling, so latency-sensitive tasks hit that boundary before bandwidth or voltage limits are reached.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.