Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Green circuit board with black memory chips, 260-pin SODIMM form factor, no heat spreader

NEMIX RAM

NEMIX RAM 16GB DDR4 3200 CL22 260-Pin SODIMM POSIFLEX ZT-3715 memory upgrade

SKU CH-NQ1Q-7Q3KP

16GB DDR4 3200 CL22 SODIMM upgrades POSIFLEX ZT-3715 terminals with 260-pin compatibility

  • Capacity16GB
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16 GB DDR4 3200 MHz upgrade for POSIFLEX ZT-3715
  • CL22 latency at 1.2 V for stable terminal operation
  • 260-pin SODIMM form factor fits the ZT series slot
  • 2Rx8 dual-rank organisation using major OEM chips
  • Non-ECC unbuffered design matches the POS terminal specification

POSIFLEX ZT-3715 memory upgrade

This 16 GB DDR4 SODIMM is built specifically for the POSIFLEX ZT-3715 Haydn ZT Series point-of-sale terminal. It delivers a direct-fit upgrade for retailers and IT teams who need to expand memory in that exact platform without compatibility guesswork.

16 GB CL22 capacity and headroom

The single 2Rx8 module runs at 3200 MT/s (PC4-25600) with 1.20 V and CL22 latency, adding 16 GB of non-ECC unbuffered memory in one slot. It handles typical POS workloads and multitasking; systems that require more than 16 GB total or registered ECC modules will need a different configuration.

260-pin DDR4 SODIMM form factor

The module uses the 260-pin DDR4 SODIMM interface with 2Rx8 organisation and no heat spreader. Only platforms that accept this exact pin-out, voltage and rank layout can use it — other DDR generations or DIMM types will not fit.

I korthet

  • 16 GB DDR4 3200 MHz upgrade for POSIFLEX ZT-3715
  • CL22 latency at 1.2 V for stable terminal operation
  • 260-pin SODIMM form factor fits the ZT series slot
  • 2Rx8 dual-rank organisation using major OEM chips
  • Non-ECC unbuffered design matches the POS terminal specification

Specifikationer

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM
Part NumberMS25600-628K1
Capacity16GB
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL22
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB (1X16GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM

Frågor om den här produkten

Will this 16GB DDR4 3200 CL22 module run alongside the existing 8GB stick in my POSIFLEX ZT-3715?

Yes, this 260-pin SODIMM is built for the ZT-3715 and operates at 1.2V with CL22 timing, so it will work in the same DDR4 slot as your current module.

How can I confirm the new memory is recognised at the correct 3200 speed after installation?

Enter the system BIOS or use a tool such as CPU-Z; the memory tab should show 16GB running at DDR4 3200 (PC4-25600) with CAS latency 22.

Does the package include only the 16GB SODIMM or are any tools or brackets supplied?

The box contains the single 16GB 2Rx8 DDR4 3200 SODIMM; no screwdriver, bracket or additional hardware is included.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.