Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Green circuit board SODIMM module with black memory chips, no heat spreader

NEMIX RAM

NEMIX RAM 16GB DDR4 3200 CL22 2Rx8 1.2V 260-Pin SODIMM POSIFLEX EK-1532

SKU CH-4WFB-DCFAD

16GB DDR4 3200 CL22 SODIMM module validated for POSIFLEX EK-1532 kiosks

  • Capacity16GB
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16 GB DDR4 3200 MHz for faster POS transactions
  • CL22 latency at 1.2 V keeps kiosks responsive
  • 2Rx8 dual-rank layout maximises bandwidth on POSIFLEX EK-1532
  • 260-pin SODIMM form factor fits Mercury Series slots directly
  • Built with Samsung, Micron or Hynix chips for enterprise reliability

POSIFLEX EK-1532 DDR4 SODIMM

This NEMIX RAM module delivers 16GB of DDR4 3200 memory in a 260-pin SODIMM form factor built specifically for the POSIFLEX EK-1532 Mercury Series kiosk. It runs at 1.2V with CL22 latency and uses a 2Rx8 unbuffered non-ECC layout validated for that platform.

Kiosk integrators and POS technicians

The stick targets technicians upgrading or servicing POSIFLEX EK-1532 units that accept a single 16GB SODIMM. It is not for builders who need ECC registered memory, desktop DIMM form factors, higher-speed bins, or capacities beyond 16GB per slot.

Check your kiosk manual

Verify the EK-1532 motherboard supports DDR4 3200 SODIMMs at 1.2V and has a free 260-pin slot before ordering. Confirm the system BIOS recognises 2Rx8 non-ECC modules and that no vendor whitelist blocks third-party memory.

I korthet

  • 16 GB DDR4 3200 MHz for faster POS transactions
  • CL22 latency at 1.2 V keeps kiosks responsive
  • 2Rx8 dual-rank layout maximises bandwidth on POSIFLEX EK-1532
  • 260-pin SODIMM form factor fits Mercury Series slots directly
  • Built with Samsung, Micron or Hynix chips for enterprise reliability

Specifikationer

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM
Part NumberMS25600-628K1
Capacity16GB
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL22
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB (1X16GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM

Frågor om den här produkten

Does this DDR4 3200 SODIMM fit the POSIFLEX EK-1532 Mercury Series kiosk?

Yes, the module is built to the POSIFLEX POS DDR4 3200 specification with 260-pin SODIMM form factor and 1.2 V operation for that kiosk.

Can I add this 16 GB stick alongside my existing DDR4 memory in the same kiosk?

It will run at DDR4 3200 CL22 1.2 V; matching speed, voltage and CAS latency with the installed sticks avoids timing conflicts.

How do I confirm the kiosk recognises the full 16 GB after installation?

Check the BIOS memory summary or the OS task manager — both should report 16 GB at 3200 MT/s.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.