BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 US$
0.00277883BTC
I lager
NEMIX RAM
NEMIX RAM 192GB (4x48GB) DDR5 5600 CL46 1.1V ECC UDIMM ASRock Rack W880D4U-2L2T memory upgrade
192 GB DDR5 ECC UDIMM kit with four 48 GB modules at 5600 MHz CL46 for ASRock Rack W880D4U-2L2T
- Capacity192GB (4 x 48GB)
- SpeedDDR5 5600 (PC5 44800)
- ECCYes
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 192 GB total capacity with four 48 GB modules
- ECC protection detects and corrects single-bit errors
- DDR5 5600 speed rated at PC5-44800 bandwidth
- Low 1.1 V operation reduces power draw
- 288-pin UDIMM fits ASRock Rack W880D4U-2L2T motherboard
System-Specific DDR5 ECC Kit
This 192GB kit contains four 48GB unbuffered UDIMMs built for the ASRock Rack W880D4U-2L2T motherboard. It delivers DDR5 5600 speed with CL46 latency at 1.1V. Error-correcting code protects data integrity in server and workstation workloads. The modules use major OEM chips from Samsung, Micron or Hynix.
Capacity and Headroom
Four dual-rank 48GB modules populate the board with 192GB of addressable memory. This suits virtualisation hosts, database nodes and compute-heavy workstations that need large datasets in RAM. Workloads exceeding 192GB will require a platform with more slots or higher-density modules. The kit runs at the standard 5600 MT/s data rate without overclocking headroom.
Thermals Noise and Power
Modules operate at the JEDEC 1.1V baseline, keeping power draw low for dense configurations. No heat spreaders are fitted, so airflow across the DIMM slots must be adequate for sustained loads. Unbuffered ECC adds minimal latency overhead while maintaining signal integrity. Acoustic output is silent because the kit has no active cooling components.
I korthet
- 192 GB total capacity with four 48 GB modules
- ECC protection detects and corrects single-bit errors
- DDR5 5600 speed rated at PC5-44800 bandwidth
- Low 1.1 V operation reduces power draw
- 288-pin UDIMM fits ASRock Rack W880D4U-2L2T motherboard
Specifikationer
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR5 ECC Unbuffered UDIMM Memory |
| Part Number | ME44800-4828K4 |
| Capacity | 192GB (4 x 48GB) |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | ASRock |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 ECC UDIMM |
| Rank | 2Rx8 |
| Features | DDR5 ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 192GB (4 x 48GB) DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC UDIMM KIT |
Frågor om den här produkten
Will the 48 GB DDR5 modules work alongside any existing DDR5 DIMMs already installed in the ASRock Rack W880D4U-2L2T?
The kit is validated for the W880D4U-2L2T at 5600 MT/s CL46 1.1 V. Mixing with other DDR5 DIMMs of the same speed, voltage and ECC type will usually work, but the motherboard will run all slots at the slowest common timings.
How can I confirm the 192 GB kit is running at 5600 MT/s with ECC active after installation?
Enter the BIOS and verify the reported memory speed shows 5600 MT/s and ECC status is enabled. In the OS, tools such as dmidecode or CPU-Z will also show 5600 MT/s, CL46, 1.1 V and ECC functional.
Does the package contain only the four 48 GB UDIMMs or are any cables or brackets included?
The box contains the four 288-pin DDR5 ECC UDIMM modules only. No cables, brackets or additional accessories are supplied.
Även i den här avdelningen
Andra har jämfört dessa
Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.
