BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 US$
0.00273625BTC
I lager
NEMIX RAM
NEMIX RAM 256GB (16x16GB) DDR5 4800 CL40 1.1V ECC RDIMM HP Z8 G5 Fury G5 memory upgrade
A 256 GB kit of sixteen 16 GB DDR5 ECC registered DIMMs running at 4800 MT/s CL40 and 1.1 V, validated for HP Z8 G5 and Z8 Fury G5 workstations
- Capacity256GB (16 x 16GB)
- SpeedDDR5 4800 (PC5 38400)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 256 GB total capacity from 16 modules of 16 GB each
- DDR5 4800 speed rated at PC5-38400 for high bandwidth
- ECC registered design detects and corrects single-bit errors
- Low 1.1 V operation reduces power draw and heat
- Qualified for HP Z8 G5 and Z8 Fury G5 workstations
HP Z8 G5 Fury G5 upgrade
This 256GB kit contains sixteen 16GB DDR5 registered DIMMs built for HP Z8 G5 and Z8 Fury G5 workstations. Each module runs at 4800MHz with CL40 latency at 1.1V. ECC and register buffering protect data integrity in professional workloads.
DDR5 4800 registered ECC limits
Registered DDR5 at 4800MHz requires a platform that supports ECC RDIMMs and the PC5-38400 data rate. The 288-pin form factor fits only DDR5 server or workstation boards. Consumer desktops and laptops cannot use these modules.
256GB capacity for large datasets
Sixteen ranks of 1Rx8 memory provide ample headroom for virtualisation, simulation and in-memory databases. Workloads that exceed 256GB will need additional DIMM slots or higher-density modules not included in this kit.
I korthet
- 256 GB total capacity from 16 modules of 16 GB each
- DDR5 4800 speed rated at PC5-38400 for high bandwidth
- ECC registered design detects and corrects single-bit errors
- Low 1.1 V operation reduces power draw and heat
- Qualified for HP Z8 G5 and Z8 Fury G5 workstations
Specifikationer
| Brand | NEMIX RAM |
|---|---|
| Series | HPE Server/Workstation Compatible Series Memory |
| Model | HPE DDR5 4800MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR38400-618K16 |
| Capacity | 256GB (16 x 16GB) |
| Speed | DDR5 4800 (PC5 38400) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | HPE |
| CAS Latency | CL40 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 RDIMM |
| Rank | 1Rx8 |
| Features | DDR5 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 256GB (16X16GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory |
Frågor om den här produkten
Should I pick the 256GB kit with sixteen 16GB modules or a smaller capacity for my HP Z8 G5 Fury G5?
The 256GB kit fills all sixteen slots with 16GB RDIMMs, giving maximum registered ECC capacity for heavy workloads; choose a smaller kit only if you need fewer modules or plan to mix capacities later.
What does the DDR5 4800 CL40 rating deliver in an actual HP Z8 G5 Fury G5 workstation?
The modules run at 4800 MT/s with CAS latency 40 at 1.1 V, providing registered ECC throughput that matches the platform's native DDR5 4800 specification for stable server-class performance.
How does the 288-pin DDR5 RDIMM interface limit speed or capacity in this system?
The 288-pin registered DDR5 form factor is keyed for the Z8 G5 Fury G5 memory slots, capping operation at the platform's supported 4800 MT/s and allowing the full 256GB kit across all channels.
Även i den här avdelningen
Andra har jämfört dessa
Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.
