Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Two green DDR5 RDIMM modules with gold contacts and black chips

NEMIX RAM

NEMIX RAM 256GB (2x128GB) DDR5 4800 PC5-38400 CL40 1.10V 4Rx4 ECC RDIMM Dell PowerEdge R6625

SKU CH-2DTW-FKWVH

256 GB kit of two 128 GB DDR5 RDIMMs at 4800 MT/s, CL40, 1.10 V, 4Rx4 ECC registered, built for Dell PowerEdge R6625

  • Capacity256GB (2 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Capacity 256GB (2 x 128GB)

Visa 7 fler konfigurationer

Genomstrukna varianter finns, men är inte i lager här.

Rank 4Rx4

  • 1Rx8
  • 2Rx4
  • 2Rx8
  • 4Rx4

Genomstrukna varianter finns, men är inte i lager här.

  • 256 GB capacity scales memory-heavy workloads on Dell PowerEdge R6625
  • DDR5 4800 speed feeds data to multi-core CPUs with high bandwidth
  • CL40 latency at 1.10 V keeps signal timing tight under load
  • ECC registered 4Rx4 design corrects errors and stabilises dense configurations
  • 288-pin RDIMM kit installs directly into validated Dell server slots

256GB DDR5 RDIMM kit for Dell PowerEdge R6625

This 256GB kit contains two 128GB DDR5 registered DIMMs built for the Dell PowerEdge R6625 server. Each module runs at 4800 MT/s with CL40 latency and operates at 1.1V. The 4Rx4 ECC registered design targets enterprise workloads that require error correction and high capacity per slot.

Thermals and power at 4800 MT/s

Running at the standard 1.1V DDR5 voltage keeps power draw low for 128GB modules. No heat spreaders are fitted, so airflow through the chassis handles cooling. Registered buffering adds minimal latency while maintaining signal integrity across the 288-pin interface during normal operation.

Behaviour under sustained load

Modules are stress tested under load to verify stability for continuous server duty. The 4Rx4 organisation delivers high density without exceeding the platform electrical limits. ECC correction operates continuously during extended compute or virtualisation tasks to maintain data integrity.

I korthet

  • 256 GB capacity scales memory-heavy workloads on Dell PowerEdge R6625
  • DDR5 4800 speed feeds data to multi-core CPUs with high bandwidth
  • CL40 latency at 1.10 V keeps signal timing tight under load
  • ECC registered 4Rx4 design corrects errors and stabilises dense configurations
  • 288-pin RDIMM kit installs directly into validated Dell server slots

Specifikationer

BrandNEMIX RAM
SeriesDell Series Server Memory
ModelDell Compatible DDR5 ECC Registered RDIMM
Part NumberMR38400-744K2
Capacity256GB (2 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
FeaturesDDR5 ECC Registered Server Motherboard Compatible

Andra versioner av den här modellen

5 till i samma serie

Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.

Frågor om den här produkten

How do I install the 288-pin DDR5 RDIMM modules in the PowerEdge R6625 and what step is often missed?

Power down the server, open the chassis, align the notch on each 128GB module with the slot key, press firmly until the ejector clips lock, then verify in BIOS that both 4Rx4 modules are detected at 4800 MT/s.

What maintenance or replacement will the ECC registered memory need over its service life?

No scheduled maintenance is required; the modules have no heat spreader and operate at 1.10 V, so only a firmware update or a failed DIMM detected by ECC scrubbing would prompt replacement.

What limit appears first when the 256GB kit runs sustained workloads at CL40?

The CAS latency of 40 cycles at 4800 MT/s sets the timing boundary, while the 1.1 V supply and registered design keep signal integrity stable under continuous load.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.